Hello Visha, when i did it as you described.
when sccp phone call sip phone on the cme, i get a reorder tone when sip phone on the cme calls the sccp phone on the hq, it disconnects when hwq phone is picked and the sip phone continues to ring How can this be fixed On Fri, Mar 12, 2010 at 4:57 PM, Vishal Preenja <vpree...@cisco.com> wrote: > Hi, > > While making a call from the UCM to CME Sip phone ( because you have > G711ulaw configured in the voice register pool), if you are getting > disconnect then you will need transcoder in the MRGL of Sip trunk/ GK trunk > and also make sure that you don't have MTP listed above transcoder. If > there > is MTP configured above transcoder, it will be allocated when transcoder is > requested and the call will fail. > > Thanks and regards, > Vishal Preenja. > > Hi Jeff, > > Would you please tell us more about the call flow and the end to end codec > requirements for this call. If doing g.729 over the wan, and your sip phone > is using g.711 you should transcode at br2, > > Please let us know, > > Thanks, > > On Thu, Mar 11, 2010 at 8:29 PM, Jeff Cotter <jcot...@voxns.com> wrote: > > > Can anybody tell me if a PVDM2-32 can be used as a hardware > > transcoder on UCM. Can?t seem to get a call from Call Manager to CME sip > phone working. > > I can call from CME to UCM but not the other way around. Rings but > > disconnects when answered. Transcoder shows registered in Call manager. > > Thanks > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com