I am working on Lab 1, question 4.3 specially the bandwidth under the "show gatekeeper call".
I am unable to get the output to show 16kbps. The calls completes and if I do a
call status on the phone I see that the codec is g.729, but the gatekeeper see
is as 128kbps.
Here is the GK configuration:
gatekeeper
zone local CUCM cisco.com
zone local CUCME cisco.com
zone prefix CUCM 2... gw-priority 10 gk-trunk_2
zone prefix CUCM 2... gw-priority 9 gk-trunk_1
gw-type-prefix 1#* gw ipaddr 10.5.24.101 1720 gw ipaddr 10.5.24.100 1720
gw-type-prefix 2#* gw ipaddr 10.6.255.3 1720
no shutdown
Dial-peer configuration:
dial-peer voice 100 voip
destination-pattern 2...
session target ras
tech-prefix 1#
Output of show gatekeeper call
Total number of active calls = 1.
GATEKEEPER CALL INFO
====================
LocalCallID Age(secs) BW
9-9197 244 128(Kbps)
Endpt(s): Alias E.164Addr
src EP: CUCME 4002
CallSignalAddr Port RASSignalAddr Port
10.6.255.3 1720 10.6.255.3 56566
Endpt(s): Alias E.164Addr
dst EP: gk-trunk_2 1#2002
CallSignalAddr Port RASSignalAddr Port
10.5.24.101 43384 10.5.24.101 32785
Your thoughts are appreciated.
Mark Nigh
Systems Engineer
[email protected]
(p) 314.392.6926
[cid:[email protected]]<http://www.netelligent.com/>
________________________________
This transmission and any attached files are privileged, confidential or
otherwise the exclusive property of the intended recipient or Netelligent
Corporation. If you are not the intended recipient, any disclosure, copying,
distribution or use of any of the information contained in or attached to this
transmission is strictly prohibited. If you have received this transmission in
error, please contact us immediately by responding to this message or by
telephone (314-392-6900) and promptly destroy the original transmission and its
attachments.
<<inline: image001.gif>>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
