Otto,
One thing more to add to this discussion. I tried to configure a
translation pattern to take 8555 and prefix it with an 80. My hope was
that pressing the blf directed call park button on the phone would send
8555, translate to 80-8555, and pickup the parked call. Unfortunately,
I could not do this. Have you noticed if the blf directed call park
button sends a special function to CUCM instead of the configured digits?
Perhaps my test was wrong to begin with?
Matthew Berry
/A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Written/
*Gmail:* ciscovoiceguru
*Skype:* ciscovoiceguru
*Twitter:* ciscovoiceguru
*1st Lab Attempt: *Aug 16, 2010
On 4/2/2010 7:14 PM, Otto Sanchez wrote:
Hi Scott,
For the first question, the directed call park blf button can also be
used to transfer calls to the directed call park slot, i.e. when on an
active call press the transfer softkey then the blf directed call park
button and finally the transfer button again or go on hook (if on hook
transfer was enabled)
For the second question, correct, the blf is useless to retrieve the
parked call, you must use the call park retrieval prefix,
For the last statement, the blf directed call park was designed to
monitor and park calls to the directed call park slot to perform the
function already mentioned in the first paragraph, also, in the case
of not having the blf call park button, the systems needs the prefix
to differentiate between an attempt to park a call to the directed
call park number or retrieve it,
hope this makes sense,
On Fri, Apr 2, 2010 at 7:42 AM, scott carruthers
<[email protected] <mailto:[email protected]>> wrote:
A follow up on the directed call park scenario with the BLF
monitor of the slot. Been awhile since I played with this so I
want to ensure my understanding is correct. Essentially the BLF
monitor of directed call park really allows nothing beyond having
an appearance on the phone that will show if a call is currently
parked in that slot - correct? The BLF is completely useless for
actually being able to pickup a parked call - correct? Seemed odd
to me when I was playing around with it - why program a feature
like BLF Directed Call Park but not allow the feature to be used
to actually capture the call. Just want to ensure my memory of
the feature is correct.
Thanks
Scott
------------------------------------------------------------------------
Date: Thu, 1 Apr 2010 20:22:11 -0430
From: [email protected] <mailto:[email protected]>
To: [email protected] <mailto:[email protected]>
CC: [email protected]
<mailto:[email protected]>
Subject: Re: [OSL | CCIE_Voice] Directed Call Park - Follow-up
from a post back in January
Matthew,
Right, the statement has to be corrected in the PG,
About the sip dial rule, make sure that for each pattern
description, there's only one dial parameter pattern and timeout pair,
hth,
On Thu, Apr 1, 2010 at 1:13 PM, Matthew Berry
<[email protected] <mailto:[email protected]>> wrote:
Otto -
I am working through Vol 1 Lab 8 Question 8.2. In the
verifications section of the PG (p. 478) I am told:/
/
/"Retrieve the call by pressing the BLF Speed Dial from
one of the phones..."/
However, whenever I try to retrieve the call this way I get a
reorder tone and "Park Slot Unavailable."
I was reading one of your responses on the OSL archive to this
issue and you said:
/"When you hit the directed call park BLF SD, the ucm
thinks that you want to park a call in that slot, not that
are going to retrieve it, and since there can be only one
call in the park slot, you see the unavailable message
when a call is already there."/
If that is true, it seems that there is an error in the PG.
Does that sound right? I am able to retrieve the call by
dialing 80-8555, but not by going off-hook and pressing the
Call Park BLF Speed Dial.
Also, my 8... SIP dial rule with Timeout = 0 has not taken
effect after several restarts. Any ideas?
Please let me know if my assumption is correct.
--
Matthew Berry
/A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Written/
*Gmail:* ciscovoiceguru
*Skype:* ciscovoiceguru
*Twitter:* ciscovoiceguru
*1st Lab Attempt: *Aug 16, 2010
--
Regards,
Otto Sanchez
CCIE #25592 (Voice)
Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com
------------------------------------------------------------------------
The New Busy is not the old busy. Search, chat and e-mail from
your inbox. Get started.
<http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_3>
--
Regards,
Otto Sanchez
CCIE #25592 (Voice)
Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com