Ash, The blf-speed-dial as well as the speed-dial buttons are assigned to available buttons on the phone, so if you want to enable the blf-speed-dial on the button 3 on the phone, the blf tag has to be 1 as it is the next available button after the line buttons are assigned,
hth, On Mon, Apr 5, 2010 at 6:07 PM, Ashar Siddiqui <siddas...@gmail.com> wrote: > Hi all, > > I was doing this blf-speed-dial thing for CME phones and I am not able to get > blf-speed-dial at button 3 of my phone. I don't know how can I set it at > button 3 of the phone. It's coming on button 5 at the moment and I have no > idea why its selecting button 5. > > Here is my config for blf. > > > presence > > presence call-list > > ! > > sip-ua > > presence enable > > ! > > > > ephone-dn 1 > > number 3001 > > allow watch > > > > ephone 2 > > blf-speed-dial *3* 3001 label “BLF 3001” > > I thought the "3" above is used for button but this is not happening! > > ! > ephone 1 > mac-address 0017.9497.1F89 > ephone-template 1 > max-calls-per-button 5 > busy-trigger-per-button 4 > username "scph1" > type 7961 > button 1:1 2:3 > > ephone 2 > mac-address 0017.E089.7382 > ephone-template 1 > max-calls-per-button 3 > busy-trigger-per-button 2 > username "scph2" > type 7961 > button 1:2 2:3 > > > -- > Thanks, > Ashar Siddiqui > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > -- Regards, Otto Sanchez CCIE #25592 (Voice) Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com