Sean, the last config you posted lloks like its on the br2 router.
you should have the dial-peer voice 1 pots incoming called-number . direct-inward-dial on the br1 router On Wed, Apr 7, 2010 at 7:29 AM, sean hurricane <shurric...@gmail.com> wrote: > i had that in another dial-peer, see below: > > dial-peer voice 1 pots > > incoming called-number . > direct-inward-dial > > dial-peer voice 1000 voip > destination-pattern 3...$ > voice-class codec 1 > voice-class h323 1 > session target ipv4:10.10.210.11 > dtmf-relay h245-alphanumeric > no vad > > dial-peer voice 1005 voip > preference 1 > destination-pattern 3...$ > voice-class codec 1 > voice-class h323 1 > session target ipv4:10.10.210.10 > dtmf-relay h245-alphanumeric > no vad > dial-peer voice 3600 voip > destination-pattern 3600$ > session protocol sipv2 > session target ipv4:10.10.202.2 > dtmf-relay sip-notify > codec g711ulaw > no vad > > dial-peer voice 3 pots > translation-profile outgoing OUTBOUND > destination-pattern 999 > port 0/2/0:15 > forward-digits 3 > > dial-peer voice 5 pots > translation-profile outgoing OUTBOUND > destination-pattern 9%112 > port 0/2/0:15 > forward-digits 3 > > dial-peer voice 7 pots > translation-profile outgoing LOCAL > destination-pattern 97....... > port 0/2/0:15 > forward-digits 8 > dial-peer voice 11 pots > translation-profile outgoing +DIAL > destination-pattern 90T > port 0/2/0:15 > forward-digits 12 > > dial-peer voice 666 voip > service clid_authen_collect > destination-pattern 907976852817 > session target ipv4:10.10.110.3 > incoming called-number 907976852817 > dtmf-relay h245-alphanumeric > codec g711ulaw > no vad > > dial-peer voice 9 pots > translation-profile incoming MVA > service mva > incoming called-number 3777 > no digit-strip > direct-inward-dial > > > > On Wed, Apr 7, 2010 at 2:23 AM, Omotayo <adefilabi...@gmail.com> wrote: > >> You need to add >> >> dial-peer voice 100 pots >> incoming called-number . >> direct-inward-dial >> >> >> On Wed, Apr 7, 2010 at 7:12 AM, sean hurricane <shurric...@gmail.com>wrote: >> >>> I have an h323 gateway provisioned in call manager....i can >>> successfully make outbound calls but inbound PSTN calls are not ringing the >>> phone (translation pattern is configured to strip inbound calls from 10 to >>> 4) >>> >>> i am getting the following error in the trace file >>> >>> >>> 04/06/2010 23:57:43.327 CCM|H225Handler::SdlConnectionInd, rejecting the >>> TCP connection from IP=10.10.201.1. Incoming H225 call on Port=1720, can't >>> find this port in the registered H323 endpoints port list. >>> |<CLID::StandAloneCluster><NID::10.10.210.11><CT::0,0,0,0.0><IP::><DEV::><LVL::Error><MASK::0100> >>> >>> 04/06/2010 23:57:59.551 CCM|H225Handler::SdlConnectionInd, rejecting the >>> TCP connection from IP=10.10.201.1. Incoming H225 call on Port=1720, can't >>> find this port in the registered H323 endpoints port list. >>> |<CLID::StandAloneCluster><NID::10.10.210.11><CT::0,0,0,0.0><IP::><DEV::><LVL::Error><MASK::0100> >>> >>> 04/06/2010 23:58:51.835 CCM|H225Handler::SdlConnectionInd, rejecting the >>> TCP connection from IP=10.10.201.1. Incoming H225 call on Port=1720, can't >>> find this port in the registered H323 endpoints port list. >>> |<CLID::StandAloneCluster><NID::10.10.210.11><CT::0,0,0,0.0><IP::><DEV::><LVL::Error><MASK::0100> >>> >>> >>> *Router Config >>> >>> * >>> >>> voice translation-rule 1 >>> rule 1 /415888\(1...\)/ /\1/ >>> voice translation-profile INBOUND >>> translate called 1* >>> >>> *voice-port 0/2/1:23 >>> translation-profile incoming INBOUND* >>> >>> *dial-peer voice 3000 voip >>> destination-pattern 1...$ >>> voice-class codec 1 >>> voice-class h323 1 >>> session target ipv4:10.10.210.11 >>> dtmf-relay h245-alphanumeric >>> no vad >>> >>> dial-peer voice 3005 voip >>> preference 1 >>> destination-pattern 1...$ >>> voice-class codec 1 >>> voice-class h323 1 >>> session target ipv4:10.10.210.10 >>> dtmf-relay h245-alphanumeric >>> no vad >>> >>> BR1#sh run int fa0/0.240 >>> Building configuration... >>> >>> Current configuration : 204 bytes >>> ! >>> interface FastEthernet0/0.240 >>> encapsulation dot1Q 240 >>> ip address 10.10.201.1 255.255.255.0 >>> ip helper-address 10.10.200.3 >>> h323-gateway voip interface >>> h323-gateway voip bind srcaddr 10.10.201.1 >>> >>> Weird thing is i can use csim start to call phones and they ring but >>> inbound PSTN calls gets the error msg above >>> >>> >>> any thots? >>> >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, please >>> visit www.ipexpert.com >>> >>> >> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com