ON your GK trunk - Uncheck H245 box On Fri, Apr 30, 2010 at 12:20 PM, Jeff Cotter <jcot...@voxns.com> wrote:
> > > Station to Station calls work as expected between UCM and CME including > g729 call through gatekeeper to CME sip phone using g711. Transcoder is > invoked properly and confirmed with show sccp connections. Call Routing and > Transcoder proven as functional with above. > > > > However call fails immediately if I put my GK Trunk on UCM to g729 region > (due to codec mismatch). If I change CME BACD dial-peer to g729 you hear > silence. Voice-class codec on BACD dial-p you hear silence. > > > > Change UCM Trunk to g711u region and BACD dial peer to g711u call works > fine. > > > > How is one supposed to get calls over the WAN using g729 to work with > BACD?? > > > > Dial-peer config below. All other config is proven to be working > > > > dial-peer voice 222 voip > > service aa > > destination-pattern 3500 > > session target ipv4:3.3.3.3 (loopback interface) > > incoming called-number 3500 > > dtmf-relay h245-alphanumeric > > codec g711ulaw > > no vad > > > > > > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com