MAC seems to be wrong.

On Fri, May 7, 2010 at 5:01 AM, Ashar Siddiqui <siddas...@gmail.com> wrote:
> Try the new CIPC version 7.0.3.0 as the previous one had this problem.
>
> Ash>
>
> vccie2010 wrote:
>
> Tried with no-auto-reg too but no luck... Hope it is clear (:-
>
> here is my config...
>
> telephony-service
>  no auto-reg-ephone
>  max-ephones 2
>  max-dn 4
>  ip source-address 10.10.202.1 port 2000
>  max-conferences 8 gain -6
>  transfer-system full-consult
>  create cnf-files version-stamp 7960 May 07 2010 09:00:40
> !
> !
> ephone-dn  1  dual-line
>  number 3001 no-reg both
> !
> !
> ephone-dn  2  dual-line
>  number 3002 no-reg both
> !
> !
> ephone  1
>  device-security-mode none
>  mac-address 0021.5C74.216F
>  type 7960
>  button  1:1
> !
> !
> !
> ephone  2
>  device-security-mode none
>  mac-address 00FF.0043.428A
>  type CIPC
>  button  1:2
> !
>
> On Thu, May 6, 2010 at 6:53 PM, Roger Henderson <rhender...@gmail.com>
> wrote:
>>
>> Add no auto-reg-ephone to your telephony-service section.
>>
>> Roger
>> On Fri, May 7, 2010 at 10:00 AM, vccie2010 <vccie2...@gmail.com> wrote:
>>>
>>> IP Communicator show as
>>>
>>> sh ephone output :
>>>
>>>
>>> ephone-2[1] Mac:F004.3428.A TCP socket:[4] activeLine:0 REGISTERED in
>>> SCCP ver 15/9
>>> mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0
>>> caps:10
>>> IP:10.10.0.43 2724 CIPC  keepalive 0 max_line 8
>>> Preferred Codec: g711ulaw
>>>
>>> I had the eph 3 already configured as below but somehow it show aboe eh 2
>>> auto configured ???
>>>
>>> telephony-service
>>>  load 7960-7940 P00308000500
>>>  max-ephones 2
>>>  max-dn 2
>>>  ip source-address 10.10.202.1 port 2000
>>>  dialplan-pattern 1 33132143... extension-length 4
>>>  voicemail 3600
>>>  max-conferences 8 gain -6
>>>  transfer-system full-consult
>>>  server-security-mode non-secure
>>>  create cnf-files version-stamp 7960 May 07 2010 05:37:49
>>> !
>>> !
>>> ephone-dn  1  dual-line
>>>  number 3001 no-reg both
>>> !
>>> !
>>> ephone-dn  2  dual-line
>>>  number 3002 no-reg both
>>> !
>>> !
>>> ephone  1
>>>  device-security-mode none
>>>  mac-address 0021.5C74.216F
>>>  type 7960
>>>  button  1:1
>>> !
>>> !
>>> !
>>> ephone  3  >>>>>>>>>>>>>>>>>>>>>>>>>>>>  CIPC configured manually
>>>  device-security-mode none
>>>  mac-address 00FF.0043.428A
>>>  type CIPC
>>>  button  1:2
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> For more information regarding industry leading CCIE Lab training, please
>>> visit www.ipexpert.com
>>>
>>
>
> ________________________________
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to