Found my issue, I had some Incoming Calling Party Settings on the HQ router that was changing the ANI.
On Tue, May 11, 2010 at 10:17 AM, mike deal <[email protected]> wrote: > Reviving this old thread, as I'm seeing slightly different behavior: > > > Calls from 1002 to 5002 get sent to the remote destination as expected. > > However, none of the calls are being blocked by the access list. > I've tried from PSTN line 3, *67-2123945002, etc? > > I'm also seeing some strange behavior with the Device Pool Calling Party > Transformations being applied to internal calls, even though none of the > devices are roaming? ie. Call from 1002 to 5002 shows up as From: BR1 Phone > 2 (6178631002). > > > Any thoughts? > > > > > On Mon, Aug 3, 2009 at 11:04 AM, Michael Ciarfello <[email protected] > > wrote: > >> Did you ever get this working? I am facing the same thing. >> >> >> >> Remove the ACL, it extends the call to the RD. >> >> >> >> Haven’t tried changing the EPM of Br1 Phone 2. >> >> >> >> Tried playing with the calling xforms since Br1 phone 2 dials 4-digit >> internally and comes up with 10-digit ANI. It’s now 4-digit ani showing up >> on HQ phone 2 but still doesn’t ring the RD. >> >> >> >> I’m curious what object in CCM determines what the ANI is and when the ACL >> is evaluated. I’ll have to look at the trace files. Maybe a hint in there. >> >> >> >> Going to tackle this more tonight. >> >> >> >> *From:* [email protected] [mailto: >> [email protected]] *On Behalf Of *Mike Thompson >> *Sent:* Friday, July 24, 2009 3:34 PM >> >> *To:* [email protected] >> *Subject:* [OSL | CCIE_Voice] Error in study guide/proctor guide (5.18 - >> 5.19) or bug in 7.0.1 for Mobility?? >> >> >> >> In testing mobility questions, when I call from BR1 Phone 2 (as is >> recommended by the proctor guide) the call does not forward out to my remote >> destination. When I call from 5001 (or external numbers) it works fine. So >> I started thinking… >> >> >> >> - The numbering scheme for BR1 is obviously 6178631XXX. >> >> - The pattern 617XXXXXXX is in our block scheme for the access list on the >> RDP. >> >> - The call is presented to HQ Phone 2 as 1002 when I call from BR1 Phone >> 2. HOWEVER, call isn’t forwarded out to the Remote Destination. >> >> >> >> Hmmm, I wonder… I removed the external number mask from the DN 1002, lo >> and behold *** call extends to the RD ***. SO, question is…is this a bug >> or an error in the proctor guide / study guide? >> >> >> >> I’m about to upgrade to 7.0.1 SU1a to see if the issue persists. >> >> >> >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
