CCIETalk,
The determining factor for whether a gateway registers with a TYPE of
VOIP-GW or H323-GW relies entirely on the "allow-connections" commands
entered under "voice service voip." Essentially, if your gateway is
functioning as an IP-to-IP gateway, it will display VOIP-GW.
The commands that make or break you:
voice service voip
allow-connections h t h
allow-connections h t s
allow-connections s t h
allow-connections s t s
After adding or removing these, make sure to bounce your gateway
registration with the gatekeeper using "no gateway" and "gateway."
I just verified this.
*Here is a snapshot without the commands listed above:*
HQ-RTR#show gatekeeper endpoints
GATEKEEPER ENDPOINT REGISTRATION
================================
CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags
--------------- ----- --------------- ----- --------- ---- -----
10.10.202.1 1720 10.10.202.1 58978 Spain VOIP-GW
H323-ID: BR2-RTR
Voice Capacity Max.= Avail.= Current.= 0
*After adding the commands listed above:
*HQ-RTR#show gatekeeper endpoints
GATEKEEPER ENDPOINT REGISTRATION
================================
CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags
--------------- ----- --------------- ----- --------- ---- -----
10.10.202.1 1720 10.10.202.1 50555 Spain H323-GW
H323-ID: BR2-RTR
Voice Capacity Max.= Avail.= Current.= 0*
Happy labbing!
Matthew Berry
ciscovoiceguru.com
*
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
