Hello,
I have configured a CCME with IP Phones running the SIP Firmware. I wanted to test the call pickup feature with SIP phones... Below the configuration voice register global mode cme source-address 10.10.230.1 port 5060 max-dn 10 max-pool 5 load 7945 SIP45.8-4-2S load 7941 SIP41.8-4-2S authenticate register call-feature-uri pickup http://10.10.230.1/pickup call-feature-uri gpickup http://10.10.230.1/gpickup create profile sync 0002236318330437 ! voice register dn 1 number 3001 pickup-call any-group pickup-group 1 name BR1 Phone 1 ! voice register dn 2 number 3002 pickup-group 1 name BR2 Phone 2 ! voice register dn 3 number 3003 pickup-group 1 shared-line max-calls 6 ! voice register dn 4 number 3004 pickup-group 1 Any idea why it doesn't work ? When I press the GPickup Softkey followed by * I have the reorder tone ... Claude Friderich PreSales Support NETCORE PSF S.A. 49 rue du Baerendall B.P.65 L-8201 Mamer Téléphone: 31 33 80-407 Fax: 31 33 80 8-407 GSM: 621 303 616 E-mail: [email protected] <mailto:[email protected]> -- This email was Anti Virus checked by Astaro Security Gateway. Disclaimer The information in this Internet e-mail is confidential and may be legally privileged. It is intended solely for the addressee. Access to this Internet e-mail by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this e-mail are subject to the terms and conditions expressed in our governing terms of business.
<<image001.gif>>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
