I believe you need a zone prefix for zone VIA. Have you tried to put that on?
On Mon, Jun 21, 2010 at 12:21 PM, CCIE VOICE <ccievoiced...@gmail.com>wrote: > Hey everyone...I have NO IDEA what is causing my issue and I was hoping for > your assistance. I am currently working on Volume 2, Lab 1, Task 4.2 with > no success. The goal is to dial 3XXX from HQ or BR1 and route the call from > CUCM-->GK-->CUBE-->BR2-RTR. I am getting the *Viazone gateway selection > failed for zone "VIA"* error message. I have included the relevant > configuration below. Any help is appreciated! > > > ip domain name proctorlabs.com > > voice service voip > allow-connections h323 to h323 > allow-connections h323 to sip > allow-connections sip to h323 > allow-connections sip to sip > fax protocol cisco > > interface Loopback0 > ip address 10.10.110.1 255.255.255.255 > h323-gateway voip interface > h323-gateway voip id VIA ipaddr 10.10.110.1 1719 > h323-gateway voip h323-id HQ-RTR > > sccp local FastEthernet0/0.20 > sccp ccm 10.10.200.3 identifier 1 priority 1 version 7.0 > sccp > > sccp ccm group 1 > bind interface FastEthernet0/0.20 > associate ccm 1 priority 1 > associate profile 1 register HQ-XCODER > > dspfarm profile 1 transcode > codec g711ulaw > codec g711alaw > codec g729ar8 > codec g729abr8 > codec g729r8 > maximum sessions 4 > associate application SCCP > > dial-peer voice 3000 voip > description GET CALL FROM GATEKEEPER > incoming called-number 3... > > dial-peer voice 3001 voip > description SEND CALL BACK TO GATEKEEPER > destination-pattern 3...$ > session target ras > codec g711ulaw > > gatekeeper > zone local UCM proctorlabs.com > zone local VIA proctorlabs.com > zone local UCME proctorlabs.com outvia VIA > zone prefix UCM 1... > zone prefix UCME 3... > zone prefix UCM 5... > gw-type-prefix 1#* default-technology > no shutdown > > telephony-service > sdspfarm units 5 > sdspfarm transcode sessions 4 > sdspfarm tag 1 HQ-XCODER > max-ephones 1 > max-dn 1 > ip source-address 10.10.200.3 port 2000 > max-conferences 8 gain -6 > transfer-system full-consult > create cnf-files version-stamp 7960 Jun 20 2010 23:20:02 > ! > > > HQ-RTR#sh gatek end > GATEKEEPER ENDPOINT REGISTRATION > ================================ > CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags > > --------------- ----- --------------- ----- --------- ---- ----- > > 10.10.110.2 1720 10.10.110.2 65228 VIA H323-GW > H323-ID: BR1-RTR > Voice Capacity Max.= Avail.= Current.= 0 > 10.10.110.3 1720 10.10.110.3 57209 UCME H323-GW > H323-ID: BR2-RTR > Voice Capacity Max.= Avail.= Current.= 0 > 10.10.200.3 1720 10.10.200.3 51074 VIA H323-GW > H323-ID: HQ-RTR > Voice Capacity Max.= Avail.= Current.= 0 > 192.168.1.10 36728 192.168.1.10 33279 UCM VOIP-GW > H323-ID: gk-trunk_1 > Voice Capacity Max.= Avail.= Current.= 0 > 192.168.1.11 35438 192.168.1.11 32790 UCM VOIP-GW > H323-ID: gk-trunk_2 > Voice Capacity Max.= Avail.= Current.= 0 > Total number of active registrations = 5 > > HQ-RTR#debug gatek main 10 > HQ-RTR# > Jun 21 00:15:32.991: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_process: QUEUE_EVENT > (minor 0) wakeup > Jun 21 00:15:32.995: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_rassrv_arq: > arqp=0x47D96338,crv=0xB0, answerCall=0 > Jun 21 00:15:32.995: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_rassrv_sep_arq: ARQ > Didn't use GK_AAA_PROC > Jun 21 00:15:32.995: //8000830CB000/8000830CB000/GK/gk_dns_query: No Name > servers > Jun 21 00:15:32.995: //8000830CB000/8000830CB000/GK/rassrv_get_addrinfo: > (1#3001) Matched tech-prefix 1# > Jun 21 00:15:32.995: //8000830CB000/8000830CB000/GK/rassrv_get_addrinfo: > (1#3001) Matched zone prefix 3 and remainder 001 > Jun 21 00:15:32.995: > //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_rassrv_get_ingress_network: returning > default ingress network = 1 > Jun 21 00:15:32.995: > //8000830CB000/8000830CB000/GK/rassrv_arq_select_viazone: about to check the > source side, src_zonep=0x4A68299C > Jun 21 00:15:32.995: > //8000830CB000/8000830CB000/GK/rassrv_arq_select_viazone: matched zone is > UCM, and z_invianamelen=0 > Jun 21 0 > HQ-RTR#0:15:32.995: > //8000830CB000/8000830CB000/GK/rassrv_arq_select_viazone: about to check the > destination side, dst_zonep=0x4B9C9910 > Jun 21 00:15:32.995: > //8000830CB000/8000830CB000/GK/rassrv_arq_select_viazone: matched zone is > UCME, and z_outvianamelen=3 > Jun 21 00:15:32.995: > //8000830CB000/8000830CB000/GK/rassrv_arq_select_viazone and > z_outvianamep=VIA > Jun 21 00:15:32.995: > //8000830CB000/8000830CB000/GK/rassrv_arq_select_viazone: Received ARQ for a > zone (UCME) that has an outviazone (VIA) specified. Pick an IP-IP gateway > in that viazone. > Jun 21 00:15:32.995: > //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_gw_select_ipipgw_random: zonep: > 0x4A682E7C, tpp: 0x4A62E180, current_endpt: 0 > Jun 21 00:15:32.995: > //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_gw_select_ipipgw_random: Gateway selection > will start at the top of the linked list. use_count=0, current_endpt=0 > Jun 21 00:15:32.995: > //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_gw_select_ipipgw_random: qelemp=0x0, > loop_count=0 > Jun 21 00:15:32.995: > //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_gw_select_ipipgw_random: Could not find an > IPIPGW. > Jun 21 00:15:32.995: > //8000830CB000/8000830CB000/GK/rassrv_get_addrinfo(1#3001): Viazone gateway > selection failed for zone "VIA" > Jun 21 00:15:32.995: //8000830CB000/8000830CB000/GK/gk_rassrv_sep_arq: > rassrv_get_addrinfo() failed (return code = 0x805) > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com