Guys Are you testing this particular feature in preparation for the lab exam or for your work/production requirements?
I ask the question because the version of IOS all lab routers are running with is 12.4(20)T2 as per Ben Ng during the last ask the expert forum. On Tue, Jul 27, 2010 at 4:04 AM, Graham Hopkins <ghopk...@wolf-rock.co.uk>wrote: > On my own kit 2801/2811 12.4.24Txx ( will check exact version when I get > home). Yes I can only get it to work with auto provision none if I use > privacy off on the ephone, it then appears to take the phone template that > refers to the remote in use soft keys but no privacy button appears on the > phones. > > I tend to agree that this must be IOS related as everyone gets slightly > different results. Just wanted to explore all the options in case a lab > question asked not to configure the ephones and was also thinking about the > comment on the IP Expert blog - from Ben Ng I think - saying that there > are bugs and we ought to know the workarounds > > Graham > > On 26 Jul 2010, at 16:44, Mark Holloway <m...@markholloway.com> wrote: > > > Graham, > > > > Are you configuring this in your own lab or using Proctor Labs? I am > using my own lab (2800's, 12.4.24T3, 7965 phones) and I couldn't get cBarge > to work in SRST with auto provision none. Others using Proctor Labs said > they could get it to work. Perhaps it's a difference between IOS versions > and/or phone types. I literally tried everything. > > > > On Jul 26, 2010, at 6:59 AM, Graham Hopkins wrote: > > > >> Been following the thread on this and have concerns about the > ephone-template not appearing to work. The only but I can find that relates > to this is CSCsx15347 which refers to a G.729 codec in the ephone -template > not being used until after a reboot. > >> > >> The only way I can get this to work without specifying privacy off under > the ephone is to run with srst mode auto-provision all and then save the > config and reboot - the ephone-template then works privacy button as well . > Config below. > >> > >> Anyone have any further thoughts on how to do this without using > auto-provision all. > >> > >> Anyone found a way to do it with auto provision none and the ephone > template - no manual configuration of the ephone? > >> > >> > >> telephony-service > >> sdspfarm units 4 > >> sdspfarm tag 1 br1-conf > >> no privacy > >> conference hardware > >> srst mode auto-provision all > >> srst ephone template 1 > >> srst dn line-mode octo > >> max-ephones 4 > >> max-dn 8 > >> ip source-address 10.10.201.1 port 2000 > >> system message CCIE SRST Fallback > >> voicemail 912123945600 > >> max-conferences 8 gain -6 > >> transfer-system full-consult > >> create cnf-files version-stamp 7960 Jul 21 2010 11:48:33 > >> > >> > >> ephone-template 1 > >> privacy off > >> privacy-button > >> softkeys remote-in-use Newcall CBarge > >> > >> > >> ephone 1 > >> mac-address 0026.CB3D.2888 > >> ephone-template 1 > >> button 1:1 2:2 3:3 > >> ! > >> ! > >> ! > >> ephone 2 > >> mac-address 0021.D8B8.EDDF > >> ephone-template 1 > >> button 1:4 2:3 > >> ! > >> > >> Regards > >> > >> Graham > >> > >> > >> _______________________________________________ > >> For more information regarding industry leading CCIE Lab training, > please visit www.ipexpert.com > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com