I have not played with it on cme but i know for sure it cannot be changed in ccm

Sent from my phone

On Aug 7, 2010, at 11:44 AM, Trying 2nd CCIE <dukelon...@gmail.com> wrote:

> Hi guys,
> 
> I've noticed that when CUCM is up and cbarge is used, the words "To 
> conference appear on the phones. However, when the site goes to SRST, it 
> shows "To Barge" instead of "To Conference" Can anyone help to make the 
> display consistent in both CUCM and SRST mode?
> 
> thanks and best regards
> 
> On 8 August 2010 00:41, CCIE <givemeccievoice2...@gmail.com> wrote:
> The scenario specifically involves using auto-provision none. Have you tested 
> and verified this?
> 
> 
> On Aug 7, 2010, at 9:35 AM, cisco voip <voip.ccieci...@gmail.com> wrote:
> 
>> That bug is for srst mode auto provision none.. for provision all, it should 
>> work
>> 
>> The problem you are facing of having cbarge for split second is because you 
>> had single button cbarge when phones were registered to CUCM, disable that 
>> setting and make it normal cbarge, they will start to work in srst mode as 
>> well
>> 
>> 
>> 
>> On Fri, Aug 6, 2010 at 5:05 PM, Ashar Siddiqui <siddas...@gmail.com> wrote:
>> I am glad that the solution proposed by Cisco is exactly what I did months 
>> back after trying different solutions.
>> 
>>  
>> 
>> Ash.
>> 
>>  
>> 
>> From: ccie_voice-boun...@onlinestudylist.com 
>> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of CCIE Voice GMAIL
>> Sent: 06 August 2010 03:13
>> 
>> 
>> To: ccie_voice@onlinestudylist.com
>> Subject: Re: [OSL | CCIE_Voice] Cbarge and SRST (Again) (Again) and (Again) 
>> what am I missing???
>>  
>> 
>> I thought I’d share this with everyone as this have been extremely 
>> frustrating for me.  Apparently this is a known bug (well…recently known). 
>> 
>>  
>> 
>> CSCti11843
>> 
>>  
>> 
>>  
>> 
>> From: ccie_voice-boun...@onlinestudylist.com 
>> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of MARSHALL, JODY 
>> C (ATTBCS)
>> Sent: Wednesday, August 04, 2010 4:55 AM
>> To: ccie_voice@onlinestudylist.com
>> Subject: [OSL | CCIE_Voice] Cbarge and SRST (Again) (Again) and (Again) what 
>> am I missing???
>> 
>>  
>> 
>> I have read (several) post on this and have tested several different ways. 
>> None of which have I been able to make work. Can you please take a look and 
>> see if I am missing something. The first configuration is from 
>> auto-provision all. I had the phones registers then unregister bounced the 
>> router and register again. Cbarge does not work. I see the remote-in-use 
>> state for a second then disappears. I then registered the phones to CUCM and 
>> removed telephony-service reloaded the router and reconfigured 
>> telephony-service with auto-provision none with the second configuration 
>> posted. Cbarge does not work.
>> 
>> 124-20.T5.bin
>> 
>> telephony-service
>> 
>>  sdspfarm units 5
>> 
>>  sdspfarm tag 2 sitebcfb
>> 
>>  conference hardware
>> 
>>  srst mode auto-provision all
>> 
>>  srst ephone template 1
>> 
>>  srst ephone description SRST : Aug 03 2010 13:28:28 : Aug 03 2010 21:20:20
>> 
>>  srst dn template 1
>> 
>>  srst dn line-mode octo
>> 
>>  max-ephones 4
>> 
>>  max-dn 30 preference 3
>> 
>>  ip source-address 10.12.202.1 port 2000
>> 
>>  system message CCIEVOICE
>> 
>>  time-zone 8
>> 
>>  date-format dd-mm-yy
>> 
>>  voicemail 2220
>> 
>>  max-conferences 8 gain -6
>> 
>>  web admin system name administrator password ccievoice
>> 
>>  transfer-system full-consult
>> 
>>  transfer-pattern .T
>> 
>>  create cnf-files version-stamp 7960 Aug 03 2010 21:20:26
>> 
>> !
>> 
>>          
>> 
>> R2#sho sccp
>> 
>> SCCP Admin State: UP
>> 
>> Gateway IP Address: 10.12.202.1, Port Number: 2000
>> 
>> IP Precedence: 5
>> 
>> User Masked Codec list: None
>> 
>> Call Manager: 10.12.202.1, Port Number: 2000
>> 
>>                 Priority: N/A, Version: 6.0, Identifier: 3
>> 
>>                 Trustpoint: N/A
>> 
>> Call Manager: 10.12.200.21, Port Number: 2000
>> 
>>                 Priority: N/A, Version: 6.0, Identifier: 2
>> 
>>                 Trustpoint: N/A
>> 
>> Call Manager: 10.12.200.22, Port Number: 2000
>> 
>>                 Priority: N/A, Version: 6.0, Identifier: 1
>> 
>>                 Trustpoint: N/A
>> 
>> Conferencing Oper State: ACTIVE - Cause Code: NONE
>> 
>> Active Call Manager: 10.12.202.1, Port Number: 2000
>> 
>> TCP Link Status: CONNECTED, Profile Identifier: 2
>> 
>> Reported Max Streams: 8, Reported Max OOS Streams: 0
>> 
>> Supported Codec: g711ulaw, Maximum Packetization Period: 30
>> 
>> Supported Codec: g711alaw, Maximum Packetization Period: 30
>> 
>> Supported Codec: g729ar8, Maximum Packetization Period: 60
>> 
>> Supported Codec: g729abr8, Maximum Packetization Period: 60
>> 
>> Supported Codec: g729r8, Maximum Packetization Period: 60
>> 
>> Supported Codec: g729br8, Maximum Packetization Period: 60
>> 
>> Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30
>> 
>> Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30
>> 
>> Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization 
>> Period: 30
>> 
>> R2#sho ephone
>> 
>> ephone-1[0] Mac:001A.6D57.021D TCP socket:[1] activeLine:0 REGISTERED in 
>> SCCP ver 17/9
>> 
>> mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 
>> caps:8 privacy:0
>> 
>> IP:10.10.255.156 35781 7961  keepalive 82 max_line 6 available_line 5
>> 
>> button 1: dn 1  number 3001 CH1   IDLE         CH2   IDLE         CH3   IDLE 
>>         CH4   IDLE         CH5   IDLE         CH6   IDLE         CH7   IDLE  
>>        CH8   IDLE         
>> 
>> button 2: dn 2  number 3012 CH1   IDLE         CH2   IDLE         CH3   IDLE 
>>         CH4   IDLE         CH5   IDLE         CH6   IDLE         CH7   IDLE  
>>        CH8   IDLE         shared
>> 
>> privacy button is enabled
>> 
>> Preferred Codec: g711ulaw
>> 
>>  
>> 
>> ephone-2[1] Mac:0019.56A3.A0D8 TCP socket:[2] activeLine:0 REGISTERED in 
>> SCCP ver 17/9
>> 
>> mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 
>> caps:8 privacy:0
>> 
>> IP:10.10.255.153 14441 7961  keepalive 82 max_line 6 available_line 5
>> 
>> button 1: dn 3  number 3002 CH1   IDLE         CH2   IDLE         CH3   IDLE 
>>         CH4   IDLE         CH5   IDLE         CH6   IDLE         CH7   IDLE  
>>        CH8   IDLE         
>> 
>> button 2: dn 2  number 3012 CH1   IDLE         CH2   IDLE         CH3   IDLE 
>>         CH4   IDLE         CH5   IDLE         CH6   IDLE         CH7   IDLE  
>>        CH8   IDLE         shared
>> 
>> privacy button is enabled
>> 
>> Preferred Codec: g711ulaw
>> 
>> ephone-dn-template  1
>> 
>>  call-forward busy 2220
>> 
>>  call-forward noan 2220 timeout 20
>> 
>>  mwi sip
>> 
>> !        
>> 
>> !
>> 
>> ephone-template  1
>> 
>>  privacy-button
>> 
>>  softkeys remote-in-use  CBarge Newcall!
>> 
>> !
>> 
>> ephone-dn  1  octo-line
>> 
>>  number 3001
>> 
>>  label 3001
>> 
>>  description +9723033001
>> 
>>  name SiteBPh1
>> 
>>  preference 3
>> 
>>  ephone-dn-template 1
>> 
>> !
>> 
>> !
>> 
>> ephone-dn  2  octo-line
>> 
>>  number 3012
>> 
>>  label 3012
>> 
>>  description 3012
>> 
>>  name 3012
>> 
>>  preference 3
>> 
>> ephone-dn-template 1
>> 
>> !
>> 
>> !
>> 
>> ephone-dn  3  octo-line
>> 
>>  number 3002
>> 
>>  label 3002
>> 
>>  description +19723033002
>> 
>>  name SiteBPh2
>> 
>>  preference 3
>> 
>>  ephone-dn-template 1
>> 
>> !
>> 
>> !
>> 
>> ephone-dn  5  octo-line
>> 
>>  number 3020
>> 
>>  conference ad-hoc
>> 
>>  preference 3
>> 
>>  no huntstop
>> 
>> !
>> 
>> !
>> 
>> ephone  1
>> 
>>  privacy off
>> 
>>  device-security-mode none
>> 
>>  description SRST : Aug 03 2010 13:28:28
>> 
>>  mac-address 001A.6D57.021D
>> 
>>  ephone-template 1
>> 
>>  button  1:1 2:2
>> 
>> !
>> 
>> !
>> 
>> !
>> 
>> ephone  2
>> 
>>  privacy off
>> 
>>  device-security-mode none
>> 
>>  description SRST : Aug 03 2010 13:28:28
>> 
>>  mac-address 0019.56A3.A0D8
>> 
>>  ephone-template 1
>> 
>>  button  1:3 2:2
>> 
>> telephony-service
>> 
>>  sdspfarm units 5
>> 
>>  sdspfarm tag 2 sitebcfb
>> 
>>  no privacy
>> 
>>  conference hardware
>> 
>>  srst mode auto-provision none
>> 
>>  srst ephone template 1
>> 
>>  srst ephone description SRST
>> 
>>  srst dn template 1
>> 
>>  srst dn line-mode octo
>> 
>>  authentication credential administrator ccievoice
>> 
>>  max-ephones 4
>> 
>>  max-dn 30
>> 
>>  ip source-address 10.12.202.1 port 2000
>> 
>>  system message CCIEVOICE
>> 
>>  time-zone 8
>> 
>>  date-format dd-mm-yy
>> 
>>  keepalive 10
>> 
>>  voicemail 2220
>> 
>>  max-conferences 8 gain -6
>> 
>>  web admin system name administrator password ccievoice
>> 
>>  transfer-system full-consult
>> 
>>  transfer-pattern .T
>> 
>>  create cnf-files
>> 
>> !
>> 
>> !
>> 
>> ephone-dn-template  1
>> 
>>  call-forward busy 2220
>> 
>>  call-forward noan 2220 timeout 20
>> 
>>  mwi sip
>> 
>> !
>> 
>> !
>> 
>> ephone-template  1
>> 
>>  privacy off
>> 
>>  softkeys remote-in-use  Newcall CBarge
>> 
>>  softkeys seized  Redial Endcall Cfwdall Meetme Pickup Callback
>> 
>> !
>> 
>> !
>> 
>> ephone-dn  5  octo-line
>> 
>>  number 3020
>> 
>>  conference ad-hoc
>> 
>>  no huntstop
>> 
>> !
>> 
>> !
>> 
>> ephone  1
>> 
>>  privacy off
>> 
>>  device-security-mode none
>> 
>> !
>> 
>> !
>> 
>> !
>> 
>> ephone  2
>> 
>>  privacy off
>> 
>>  device-security-mode none
>> 
>>  
>> 
>> 
>> _______________________________________________
>> For more information regarding industry leading CCIE Lab training, please 
>> visit www.ipexpert.com
>> 
>> 
> 
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
> 
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to