Place a laptop in that vlan, get an IP? Then the prob isn't UCM? No, ten troubleshoot scope.
If you do from laptop / PC, then plz send switch config. Sent from my phone, apologies for any typos. On Sep 18, 2010, at 4:07 PM, "ratan singh" <ratan...@rediffmail.com> wrote: > Hi, > > I have 2 phones in HQ site & 2 phone in BR1 and have created DHCP pool > in CUCM. HQ phones connection are > > CUCM ---->SW1----hub--->HQ phones > > Configuration for HQ phones:-- > > HQ Router:- i have added Ip helper address(CCUM PUB IP)in the router > In SW1:-- interface ra fa0/1-2 > switchport mode access > switchport access vlan(data vlan ID) > switchport voice vlan(voice vlan ID) > > > BR1 phones connection are > > Router--->Br1 phones > > Configurtaion for Br1 > > i have added Ip helper address(CCUM PUB IP)on voice vlan interface > & on phones interface > > interface ra fa0/1-2 > switchport mode trunk > switchport access vlan(data vlan ID) > switchport voice vlan(voice vlan ID) > spanning tree portfast > > > > Here is the problem, My BR1 phones are able to register with CUCM & > they are working fine.But my HQ phones are not taking IPs from CUCM. > Can anyone help me to resolve this issue? > > > Thanks a ton in advance. > > > > > > > > > > > With Warm Regards > > Ratan Singh > Network Engineer > Mobile:-91-9818807770 > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com