Warren, Vik, Those are the callmanager versions. The actual versions of the SCCP protocol and which goes with what version of CUCM is generally not published. They're somewhere around SCCP version 19 or 20 at the moment. CUCM 7.x, at leaster earlier versions run sccp v 17. not sure on what 7.1(5) or the like would run. You generally dont need to know these exact numbers. the CUCM version you configure for the ccm command in IOS determines what features your media device assumes CUCM is able to support.
-Peter On Tue, Oct 12, 2010 at 1:32 PM, Vik Malhi <vma...@ipexpert.com> wrote: > HQ-RTR#sh sccp > SCCP Admin State: DOWN > Gateway IP Address: 0.0.0.0, Port Number: 0 > IP Precedence: 5 > User Masked Codec list: None > Call Manager: 10.10.210.11, Port Number: 2000 > Priority: N/A, *********Version: 5.0.1***********, Identifier: 1 > > > -- > Vik Malhi CCIE #13890 > Managing Partner / Instructor - IPexpert, Inc. > Mailto: vma...@ipexpert.com > Telephone: +1.810.326.1444 ext 420 > Fax: +1.810.454.0130 > Live Assistance, Please visit: www.ipexpert.com/chat > <http://www.ipexpert.com/chat> > > IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, > Audio Tools, Online Hardware Rental and Classroom Training for the Cisco > CCIE (R&S, Voice, Wireless, Security & Service Provider) certification(s) > with training locations throughout the United States, Europe, South Asia and > Australia. Be sure to visit our online communities at > www.ipexpert.com/communities <http://www.ipexpert.com/communities> and our > public website at www.ipexpert.com <http://www.ipexpert.com/> > > > >> From: Randall Crumm <randall.cr...@harmonicinc.com> >> Date: Fri, 8 Oct 2010 14:39:20 -0700 >> To: "Warren Heaviside (wheavisi)" <wheav...@cisco.com>, OSL Group >> <ccie_voice@onlinestudylist.com> >> Subject: Re: [OSL | CCIE_Voice] How do you determine what the sccp version is >> >> Hi Warren, >> I don't see the sccp version when I do show run. >> >> RC >> >> -----Original Message----- >> From: Warren Heaviside (wheavisi) [mailto:wheav...@cisco.com] >> Sent: Friday, October 08, 2010 2:26 PM >> To: ccie_voice@onlinestudylist.com >> Cc: Randall Crumm >> Subject: RE: How do you determine what the sccp version is >> >> Hi Randall, >> >> You can see the sccp version in the show run. If you want to know the >> DSP firmware version you can use "show voice dsp detail". >> >> Warren >> >> Warren Heaviside wheav...@cisco.com >> ENGINEER.CUSTOMER SUPPORT >> High Touch Technical Support >> Phone: +1 408 853 7995 >> >> For corporate legal information go to: >> http://www.cisco.com/web/about/doing_business/legal/cri/index.html >> >> >> -----Original Message----- >> From: ccie_voice-boun...@onlinestudylist.com >> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of >> ccie_voice-requ...@onlinestudylist.com >> Sent: Friday, October 08, 2010 11:57 AM >> To: ccie_voice@onlinestudylist.com >> Subject: CCIE_Voice Digest, Vol 56, Issue 93 >> >> Send CCIE_Voice mailing list submissions to >> ccie_voice@onlinestudylist.com >> >> To subscribe or unsubscribe via the World Wide Web, visit >> http://onlinestudylist.com/mailman/listinfo/ccie_voice >> or, via email, send a message with subject or body 'help' to >> ccie_voice-requ...@onlinestudylist.com >> >> You can reach the person managing the list at >> ccie_voice-ow...@onlinestudylist.com >> >> When replying, please edit your Subject line so it is more specific >> than "Re: Contents of CCIE_Voice digest..." >> >> >> Today's Topics: >> >> 1. How do you determine what the sccp version is (Randall Crumm) >> 2. Proxy Domain Parameter on CUPS (Tamer Ismail) >> 3. UCCX Prompt (Mark Holloway) >> 4. MVA and MGCP (CCIE Voice GMAIL) >> 5. Unity Connection - Error when trying to record a customer >> greeting (Mark Holloway) >> >> >> ---------------------------------------------------------------------- >> >> Message: 1 >> Date: Fri, 8 Oct 2010 09:13:27 -0700 >> From: Randall Crumm <randall.cr...@harmonicinc.com> >> To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> >> Subject: [OSL | CCIE_Voice] How do you determine what the sccp version >> is >> Message-ID: >> <9473270a65ca67458d287f3da3c9f37d11a3368...@exch-cms.hlit.local> >> Content-Type: text/plain; charset="us-ascii" >> >> Hi is there a command to run to see the version of sccp on the router? >> >> Thanks, >> RC >> >> >> ------------------------------ >> >> Message: 2 >> Date: Fri, 8 Oct 2010 18:22:22 +0200 >> From: "Tamer Ismail" <tih...@gmail.com> >> To: <ccie_voice@onlinestudylist.com> >> Subject: [OSL | CCIE_Voice] Proxy Domain Parameter on CUPS >> Message-ID: <00a601cb6704$fddf48b0$f99dda...@com> >> Content-Type: text/plain; charset="us-ascii" >> >> Hello Experts, >> I found that I have to modify Proxy Domain parameter in Presence service >> parameter. >> And to set it as CUCM enterprise parameter. >> Actually I don't know the value of that parameter. >> >> Please advice. >> >> Tamer, >> >> >> >> ------------------------------ >> >> Message: 3 >> Date: Fri, 8 Oct 2010 10:17:38 -0700 >> From: Mark Holloway <m...@markholloway.com> >> To: CCIE Voice Maillist <ccie_voice@onlinestudylist.com> >> Subject: [OSL | CCIE_Voice] UCCX Prompt >> Message-ID: <32e05610-e8c7-41fd-9400-8e2a8ced8...@markholloway.com> >> Content-Type: text/plain; charset=us-ascii >> >> Does anyone know if/what UCCX wav file says "Please try again later" >> >> Thanks, >> Mark >> >> >> >> ------------------------------ >> >> Message: 4 >> Date: Fri, 8 Oct 2010 11:29:28 -0700 >> From: "CCIE Voice GMAIL" <givemeccievoice2...@gmail.com> >> To: <ccie_voice@onlinestudylist.com> >> Subject: [OSL | CCIE_Voice] MVA and MGCP >> Message-ID: <000601cb6716$befe9d50$3cfbd7...@com> >> Content-Type: text/plain; charset="us-ascii" >> >> Hi everyone, >> >> >> >> >> >> I am trying to figure out how I can configure an MGCP GW to work with >> MVA. >> I have a two sites, HQ (MGCP) and SB (H323) that I am configuring to >> work >> with MVA. >> >> >> >> I have successfully configure my SB router (H323) to allow MVA >> capability >> with this configuration: >> >> >> >> Service Parameters > CallManager > Clusterwide Parameters - Mobility >> >> Enable Mobile Voice Access - True >> >> Mobile Voice Access Number - 3777 >> >> >> >> Media Resouces > Mobile Voice Access >> >> MVA Directory Number - 3777 >> >> Partition - <None> >> >> Locale - English United States >> >> >> >> application >> >> service MVA http://172.21.51.204:8080/ccmivr/pages/IVRMainpage.vxml >> >> >> >> voice translation-rule 1 >> >> rule 1 /^1312301\(3777$\)/ /\1/ >> >> >> >> voice translation-profile MVA >> >> translate called 1 >> >> >> >> dial-peer voice 6 pots >> >> description IN MVA >> >> incoming called 13123013777 >> >> service MVA >> >> translation-profile out MVA >> >> >> >> dial-peer voice 7 voip >> >> description TO SUB MVA >> >> destination-pattern 3777 >> >> session target ipv4:172.21.51.205 >> >> preference 1 >> >> codec g711ulaw >> >> no vad >> >> dtmf-relay h245-signal >> >> >> >> dial-peer voice 8 voip >> >> description TO PUB MVA >> >> destination-pattern 3777 >> >> session target ipv4:172.21.51.204 >> >> preference 2 >> >> codec g711ulaw >> >> no vad >> >> dtmf-relay h245-signal >> >> >> >> I have also configured a Remote Destination Profile and Remote >> Destination >> that is working completely. >> >> >> >> I only have a single interface on the HQ gateway (MGCP) that can be used >> for >> communications with CUCM as my lab is hooked up to a corporate network. >> Every time I try to add the H323 GW for this router to the CUCM database >> I >> get an error saying that a required field matches an existing database >> entry. I assume that this error is related to the fact that I have the >> HQ >> GW registered as MGCP with the same interface's IP address. >> >> >> >> Is there any way to get this working with MGCP? >> >> >> >> Thanks for your help, >> >> >> >> Jeff >> >> >> >> >> >> >> >> >> >> -------------- next part -------------- >> An HTML attachment was scrubbed... >> URL: >> </archives/ccie_voice/attachments/20101008/a4b02c02/attachment-0001.html >>> >> >> ------------------------------ >> >> Message: 5 >> Date: Fri, 8 Oct 2010 11:56:37 -0700 >> From: Mark Holloway <m...@markholloway.com> >> To: CCIE Voice Maillist <ccie_voice@onlinestudylist.com> >> Subject: [OSL | CCIE_Voice] Unity Connection - Error when trying to >> record a customer greeting >> Message-ID: <be1a1bc4-645c-454a-b1c8-3144b5334...@markholloway.com> >> Content-Type: text/plain; charset="us-ascii" >> >> Has anyone ever seen this before? >> >> >> I login to Unity Connection then click on my BR1PH1 user so I can record >> a custom greeting. >> >> >> -------------- next part -------------- >> A non-text attachment was scrubbed... >> Name: PastedGraphic-2.png >> Type: image/png >> Size: 9368 bytes >> Desc: not available >> URL: </archives/ccie_voice/attachments/20101008/55feec0d/attachment.png> >> -------------- next part -------------- >> >> >> >> >> When I press the Record button I get the following error. >> >> -------------- next part -------------- >> A non-text attachment was scrubbed... >> Name: PastedGraphic-3.png >> Type: image/png >> Size: 11260 bytes >> Desc: not available >> URL: >> </archives/ccie_voice/attachments/20101008/55feec0d/attachment-0001.png> >> >> ------------------------------ >> >> _______________________________________________ >> CCIE_Voice mailing list >> CCIE_Voice@onlinestudylist.com >> http://onlinestudylist.com/mailman/listinfo/ccie_voice >> >> >> End of CCIE_Voice Digest, Vol 56, Issue 93 >> ****************************************** >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
