on your H225 trunk do you have fast start option checked>? and do you have the h245 option un checked ?
2010/10/15 Deepak Puranik <deepakpura...@hotmail.com> > I have UCM-GK-CME setup in my lab and > > 1. Call from SCCP and SIP phone from HQ, BR1 to CME works fine > 2. Call from CME SCCP phone to HQ/BR1 works fine. > 3. Call from CME SIP phone to HQ/BR1 phone doe not work. I am getting RBT > and I see HQ/BR1 phone ringing but could not answer. > > There is no region setting and CME SIP phone is setup for g711. > > Here is the config > > dial-peer voice 51 voip > destination-pattern [15]... > voice-class codec 1 > session target ras > tech-prefix 1# > dtmf-relay h245-alphanumeric > ! > voice register global > mode cme > source-address 10.10.202.1 port 5060 > max-dn 20 > max-pool 10 > load 7960-7940 P0S3-08-8-00 > tftp-path flash: > create profile sync 0008033930073205 > ntp-server 10.10.100.2 mode directedbroadcast > ! > voice register dn 2 > number 3002 > name BR2 Phone 2 > ! > voice register pool 2 > id mac 0006.D7E5.B758 > type 7960 > number 1 dn 2 > dtmf-relay rtp-nte > codec g711ulaw > no vad > > Thanks, > Deepak > > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
