Hi Kobel, How can I help you? The problem is that the cue design guide available in cisco.com applies for 2.1 , I have not found a newer one
“The content in this publication applies to Cisco Unity Express 2.1 unless specifically noted in the text” http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/design/design21/cuedg21.html So some statements have to be carefully considered because version 7 of the exam. Has anybody found a better srnd for cue? Thanks De: Miron Kobelski [mailto:findko...@gmail.com] Enviado el: sábado, 16 de octubre de 2010 14:06 Para: Roig Borrell, Francesc Xavier CC: ccie_voice@onlinestudylist.com Asunto: Re: [OSL | CCIE_Voice] Dtmf-Relay Negotiation Roig, On Sat, Oct 16, 2010 at 11:14, Roig Borrell, Francesc Xavier <francesc.ro...@tecnocom.es<mailto:francesc.ro...@tecnocom.es>> wrote: Hi, Yes, I know H.245 alphanumeric is not supported with SIP. However, if I configure it (although it does not make sense), the dial-peer changes by its own the dtmf-relay method to rtp-nte with CUE. Strange behavior, isn’t? I've seen this too. h245-alphanumeric is ignored with SIP and the default method is used. I guess that the CLI should disallow this parameter once session protocol for a d-p is changed to SIP. I'm still not sure if you really get NTE with "tx_DtmfRelay=inband-voice"On my CUBE, NTE is shown as "tx_DtmfRelay=rtp-nte". That's why I mentioned those two inband methods.You can check this with debug voip rtp nte or similar command. If you see nothing, it means you are not using NTEs. Kobe I know the documentation confuses a little bit because CUE can support rfc-2833 se-10-10-202-2(config-sip)# dtmf-relay ? info info message rtp-nte RFC 2833 sip-notify sip-notify sub-notify subscribe notify http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg16088.html This is very interesting for me. Could you provide any reference to official Cisco documentation? This would solve a huge problem I have at work ;) regards kobel
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
