Does this happen for all calls inbound on CUCM, or only 1002? It might be that you have ext 1002 created as an auto-reg ext in no partition, and that this is getting matched and causing the conflict?
On Sat, Oct 16, 2010 at 8:52 PM, Cristobal Priego <cristobalpri...@gmail.com > wrote: > hello all > > i have an issue with my GK implementation > > i have the CCM cluster and br2 (CME) registered to a GK. > > when i make calls from CMM to CCME using the GK, i have no issues > > however when i try to call from CME to CCM. i always get "your call cannot > be completed as dialed" > > I already checked the ptts assigned to the extensions > the CSS for incoming calls on the Trunk that indeed matches the ptss of the > extensions > the significant digits set to 4 > > on the GK this is what i have > > gatekeeper > zone local PL ipexpert.com 10.10.110.1 > zone prefix PL 1... gw-priority 10 gk-trunk_2 > zone prefix PL 1... gw-priority 9 gk-trunk_1 > zone prefix PL 1... gw-priority 0 BR2-RTR > zone prefix PL 5... gw-priority 10 gk-trunk_2 > zone prefix PL 5... gw-priority 9 gk-trunk_1 > zone prefix PL 5... gw-priority 0 BR2-RTR > no shutdown > ! > > > HQ-RTR(config-gk)#do sh gateke end > GATEKEEPER ENDPOINT REGISTRATION > ================================ > CallSignalAddr Port RASSignalAddr Port Zone Name Type > Flags > --------------- ----- --------------- ----- --------- ---- > ----- > 10.10.110.3 1820 10.10.110.3 61408 PL H323-GW > H323-ID: BR2-RTR > Voice Capacity Max.= Avail.= Current.= 0 > 10.10.210.10 1720 10.10.210.10 32785 PL VOIP-GW > H323-ID: gk-trunk_1 > Voice Capacity Max.= Avail.= Current.= 0 > 10.10.210.11 1720 10.10.210.11 32780 PL VOIP-GW > H323-ID: gk-trunk_2 > Voice Capacity Max.= Avail.= Current.= 0 > Total number of active registrations = 3 > > HQ-RTR(config-gk)#do sh gateke gw > GATEWAY TYPE PREFIX TABLE > ========================= > Prefix: 3* > Zone PL master gateway list: > 10.10.110.3:1820 BR2-RTR > > Prefix: 1#* > Zone PL master gateway list: > 10.10.210.10:1720 gk-trunk_1 > 10.10.210.11:1720 gk-trunk_2 > Zone PL prefix 5... priority gateway list(s): > Priority 10: > 10.10.210.11:1720 gk-trunk_2 > Priority 9: > 10.10.210.10:1720 gk-trunk_1 > Zone PL prefix 1... priority gateway list(s): > Priority 10: > 10.10.210.11:1720 gk-trunk_2 > Priority 9: > 10.10.210.10:1720 gk-trunk_1 > > > HQ-RTR(config-gk)# > > > on the debug main 10 i see that the GK is sending the call to CUCM > > i have the traces enabled on CUCM and indeed the CUCM is getting the call > as 1#1002 > > > what am i missing ? > > thanks > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
