Hi Roger, I have the EPNM on the CTI ports set to the CTI-RP/VM pilot ie 3600 and EPMN is 02077353600. I have no idea why the call doesnt pass thru to the gateway.
Thanks, DA 2010/10/17 Roger Källberg <roger.kallb...@cygate.se> > You need to set the EPNM on the CTI ports to point to the number of the > CTI RP for CUE. This is since the call can not go directly to the CTI ports, > it has to first be sent to the CTI RP, then on to the CTI port. > > Sincerely > > *Roger Källberg* > CCIE #26199 (Voice) > Consultant > Cygate AB > ------------------------------ > *Från:* David A [david.a...@gmail.com] > *Skickat:* den 16 oktober 2010 19:18 > *Till:* ccie_voice@onlinestudylist.com > *Ämne:* [OSL | CCIE_Voice] Vol2 Lab7 cue aar > > Hi all, > > > I always get a busy when I configure AAR for cue and dial from HQ or SiteB. > > > I have aar group on all the phones and lines. cue external mask is same as > the sietc phones. cti ports and cti rp have aar css and aar group. I do not > see the call go out of any of the gateways. > > Anyone face similar issues. > > > Thanks, > DA >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com