do you have Br2 registered to UCM in HQ ? if you have registered the BR2 GW as H.323 make sure that the status is Unkown <ip addrr of the gw>
2010/11/8 Zafar Shakeel <zshak...@yahoo.com> > Hi: > > I am able to make calls from HQ and BR1 to BR2 (cme router) over WAN. The > reverse is not going through. PSTN works in both direction. > > UCM has the h323 gateway pointing to BR2. The gateway has the "Wait for Far > End ..." unchecked (tried both ways). > > The workbook says "Unknown H323 gateways by default will not be allowed to > make calls into UCM". It suggests to check for h323-gateway voip bind > srcaddr. It is already configured correctly on the loopback. The gateway in > CM is using this same address as well (10.10.110.3) > > My dial-peers to HQ/BR1 are using session target ipv4:10.10.210.10 (CM > address). > > Setup: HQ is SIP, BR1 is MGCP, BR2 is H323 > > Any help is appreciated. > > Thanks. > > Zafar > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com