Hi All, I have the CUBE setup on the HQ GW
CUCM to CUBE = SIP CUME to CME = h323 Codec is g729 across. Calls work fine to the CME sccp phone. However calls from CUCM to SIP CME phone has no audio. Below are my configs. **** HQ Config **** voice service voip allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip h323 emptycapability h225 connect-passthru h245 passthru tcsnonstd-passthru sip bind control source-interface FastEthernet0/0 bind media source-interface FastEthernet0/0 ! ! dial-peer voice 4000 voip destination-pattern 4... session target ipv4:10.10.202.1 incoming called-number [23]... dtmf-relay h245-alphanumeric ! dial-peer voice 2300 voip destination-pattern [23]... session protocol sipv2 session target ipv4:10.137.151.26 incoming called-number 4... dtmf-relay rtp-nte ! *** CME Config *** voice service voip allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip sip bind control source-interface GigabitEthernet0/0.400 bind media source-interface GigabitEthernet0/0.400 registrar server ! ! ! ! ! ! ! ! ! ! ! ! ! voice register global mode cme source-address 10.10.202.1 port 5060 max-dn 15 max-pool 5 load 7965 SIP45.8-4-4S timezone 21 create profile sync 0206597300406331 ntp-server 10.137.151.250 mode directedbroadcast ! voice register dn 1 number 4002 name Site C Phone 2 ! voice register pool 1 id mac 0024.C40B.13DC type 7965 number 1 dn 1 dtmf-relay rtp-nte ! I enable SIP EO with MTP and still the same result. Hope you guys can see something I am missing. Thanks, DA _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com