Why do you have a different tech prefix for VIA zone? I don't believe you need a tech prefix at all for a VIA zone / CUBE. Just have your dial-peers configured to receive what CUCM is sending.
Also, make sure that you have your "allow connections" commands. Do a show gatekeeper endpoints and CUBE should be registered as "H323-GW". If not, make sure those commands are present and/or bounce the gateway command. Please post the debug gatekeeper main 10 output as well as show gatekeeper end. Jeff From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Mritunjay Kumar Sent: Tuesday, November 30, 2010 3:06 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] call from CUCM to CME : VIA Zone Hi all , I am facing issue in GK and VIA zone sh gatek gw CUCM is registered to GK using tech-p 1# CME is registered to DK using tech-p 44# VIA zone is registered to GK using tech-p 12# sh gatek gw Prefix: 1#* Zone CUCM master gateway list: 14.160.110.15:1720 US_1 Zone CUBE master gateway list: 14.160.110.254:1720 MJ-CUBE Prefix: 12#* Zone CUBE master gateway list: 14.160.110.254:1720 MJ-CUBE Prefix: 44#* Zone CME master gateway list: 14.160.115.200:1720 MJ-CME call from CME to CUCM is working fine but call from CUCM to CME is failing. while calling this i am adding correct tech prefix and removing it in CME enabled debug gate main 5 and error is *Nov 30 11:01:04.435: //001191430300/001191430300/GK/rassrv_get_addrinfo: (44#5002) Matched tech-prefix 44# ............ ............ assrv_get_addrinfo(44#5002): Viazone gateway selection failed for zone "CUBE" ..... when CME is registered with tech-p 1# , everthing works fine ie call in both direction without introducing VIA zone , everyting works fine ie CME is regiserted with tech-p 44# gatekeeper cofig gatekeeper zone local BR1 cisco.com 14.160.110.129 zone local CME cisco.com invia CUBE outvia CUBE zone local CUCM cisco.com invia CUBE outvia CUBE zone local CUBE cisco.com zone prefix CUCM 2... zone prefix CME 5... gw-type-prefix 1#* no shutdown Is any configmissing ?? Regards, MJ
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com