Yes. that was the old config and I removed that afterward with no effect. I tried the below. Added the bind source, unable to add "upgrade" under voice register pool reset the phone and still getting the same error. *Dec 18 23:18:15.383: TFTP: Looking for XMLDefault.cnf.xml.sgn
_____ From: Prashant Patel [mailto:prashantpatel...@gmail.com] Sent: Saturday, December 18, 2010 3:46 PM To: Kent Noorda - Q Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] SIP Phones on CME - TFTP: Looking for XMLDefault.cnf.xml.sgn Also you are using dn 3002 under both sip and sccp. On Sat, Dec 18, 2010 at 5:33 PM, Prashant Patel <prashantpatel...@gmail.com> wrote: Hi Kent, Under "voice service voip" and "sip" add the "bind source-interface vlan210"command. Under voice register pool add - upgrade then create profile Reset the phone. HTH Prashant On Sat, Dec 18, 2010 at 5:27 PM, Kent Noorda - Q <kentnoo...@q.com> wrote: All, Wondering if anyone has any ideas here. Trying to register SIP phones to CME. I have CM 8.0 running and I pointed all the phones to CM, built them under CM and everything came up. I did this to get the SIP phone load from CM. When I go back to pointing the phones to the CME router I am unable to get the phones to register. Under debug tftp events I get the following error message: *Dec 18 22:32:50.111: TFTP: Looking for XMLDefault.cnf.xml.sgn Each phone is pulling the correct IP address from the local CME router. The phone load that is currently on the phone is SIP45.9-0-2TH1-2S which it pulled from CM SCCP works fine for ephone 1 and I have verifhed the MAC address of the SIP phone. I have also tried the **#** for the factory reset and still get the same error message. I tried no create prof and create prof with the same result. Below is my router config: BR2#show voice register tftp-bind tftp-server syncinfo.xml url flash:/syncinfo.xml tftp-server SIPDefault.cnf url flash:/SIPDefault.cnf tftp-server softkeyDefault_kpml.xml url flash:/softkeyDefault_kpml.xml tftp-server softkeyDefault.xml url flash:/softkeyDefault.xml tftp-server SEP0024C4BD98F4.cnf.xml url flash:/SEP0024C4BD98F4.cnf.xml show run: hostname BR2 ! boot-start-marker boot-end-marker ! ! card type command needed for slot/vwic-slot 0/0 logging message-counter syslog enable secret 5 $1$nuc2$wX1jVfNMkh0..ISg1BMCs. ! no aaa new-model clock timezone CET 1 clock summer-time CET recurring 1 Sun Apr 1:00 last Sun Oct 1:00 ! ip source-route ! ! ip cef ip dhcp excluded-address 10.0.102.1 10.0.102.10 ip dhcp excluded-address 10.0.202.1 10.0.202.10 ! ip dhcp pool Data network 10.0.102.0 255.255.255.0 default-router 10.0.102.1 ! ip dhcp pool Voice network 10.0.202.0 255.255.255.0 default-router 10.0.202.1 option 150 ip 10.0.202.1 ! ! no ipv6 cef multilink bundle-name authenticated ! ! ! ! ! ! voice service voip sip registrar server expires max 600 min 60 ! ! ! ! ! ! ! ! ! ! ! ! ! ! voice register global mode cme source-address 10.0.202.1 port 5060 max-dn 2 max-pool 2 load 7965 SIP45.8-4-2S tftp-path flash: create profile sync 0005212813061509 ! voice register dn 1 number 3002 ! voice register pool 1 id mac 0024.C4BD.98F4 type 7965 number 1 dn 1 dtmf-relay rtp-nte description 3214-3002 codec g711ulaw ! ! ! voice-card 0 ! ! ! archive log config hidekeys ! ! ! ! ! ! interface Loopback0 ip address 172.0.102.1 255.255.255.0 ! interface FastEthernet0/0 ip address 192.168.1.102 255.255.255.0 duplex auto speed auto ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface FastEthernet0/3/0 switchport access vlan 110 switchport voice vlan 210 spanning-tree portfast ! interface FastEthernet0/3/1 switchport access vlan 110 switchport voice vlan 210 spanning-tree portfast ! interface FastEthernet0/3/2 spanning-tree portfast ! interface FastEthernet0/3/3 spanning-tree portfast ! interface FastEthernet0/3/4 spanning-tree portfast ! interface FastEthernet0/3/5 spanning-tree portfast ! interface FastEthernet0/3/6 spanning-tree portfast ! interface FastEthernet0/3/7 spanning-tree portfast ! interface FastEthernet0/3/8 shutdown ! interface Serial0/1/0 no ip address encapsulation frame-relay no fair-queue ! interface Serial0/1/0.102 point-to-point bandwidth 768 ip address 162.0.102.2 255.255.255.0 snmp trap link-status frame-relay interface-dlci 102 ! interface Vlan1 no ip address ! interface Vlan110 description Data ip address 10.0.102.1 255.255.255.0 ! interface Vlan210 description Voice ip address 10.0.202.1 255.255.255.0 ip helper-address 172.0.102.1 ! router ospf 1 router-id 172.0.102.1 log-adjacency-changes network 10.0.0.0 0.255.255.255 area 0 network 162.0.0.0 0.0.255.255 area 0 network 172.0.0.0 0.0.0.255 area 0 network 192.168.1.0 0.0.0.255 area 0 ! ip forward-protocol nd ! ! ip http server ip http path flash: ! ! ! ! tftp-server flash:apps45.8-4-1-23.sbn tftp-server flash:cnu45.8-4-1-23.sbn tftp-server flash:dsp45.8-4-1-23.sbn tftp-server flash:term65.default.loads tftp-server flash:cvm45sccp.8-4-1-23.sbn tftp-server flash:jar45sccp.8-4-1-23.sbn tftp-server flash:SCCP45.8-4-2S.loads tftp-server flash:cvm45sip.8-4-1-23.sbn tftp-server flash:jar45sip.8-4-1-23.sbn tftp-server flash:SIP45.8-4-2S.loads ! control-plane ! ! ! ccm-manager fax protocol cisco ! mgcp fax t38 ecm ! ! ! ! ! gatekeeper shutdown ! ! telephony-service em logout 0:0 0:0 0:0 max-ephones 2 max-dn 2 ip source-address 172.0.102.1 port 2000 time-format 24 date-format dd-mm-yy max-conferences 8 gain -6 web admin system name admin password pancho dn-webedit transfer-system full-consult create cnf-files version-stamp Jan 01 2002 00:00:00 ! ! ephone-template 1 softkeys connected Hold Endcall Trnsfer Acct ! ! ephone-dn 1 octo-line number 3001 description 3214-3001 ! ! ephone-dn 2 octo-line number 3002 description 3214-3002 ! ! ephone 1 mac-address 0024.C4BD.743A ephone-template 1 max-calls-per-button 5 busy-trigger-per-button 3 type 7965 button 1:1 ! ! ! ephone 2 mac-address 0024.C4BD.98F4 ephone-template 1 max-calls-per-button 5 busy-trigger-per-button 3 type 7965 button 1:2 ! ! ! line con 0 password pancho line aux 0 line vty 0 4 exec-timeout 600 0 password pancho login ! scheduler allocate 20000 1000 ntp server 192.168.1.250 end BR2# _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com <http://www.ipexpert.com/>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
