Hi Shrini,
If you follow the Features and Services Guide as mentioned before, you will have success. You need to configure "hairpinning" for MGCP to work with MVA. The idea is that you will accept the call using 5999, but the MVA pilot number will be a different number. You will have to add the h323 gateway to CUCM and create a route pattern that will direct calls for 5999 to the h323 gateway. The incoming dialpeer on the gateway will be the 5999 number which will trigger the VXML script. There will be a different number needed for the MVA pilot, for example 6000. The outgoing dial-peer will point back to CUCM using this number (6000). As the h323 gateway and the MGCP gateway will be logically separate (listening to different interfaces), you can accomplish this on the same box. Hope this helps, Jeff From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Roger Carpio Sent: Sunday, January 02, 2011 7:40 AM To: ShinGei Yong Cc: ccie_voice@onlinestudylist.com; Shrini Subject: Re: [OSL | CCIE_Voice] Mobile Voice Access Hello ShinGei, Thanks for the info. In the end, MGCP will not make it for us Regards, Roger Carpio. On Sun, Jan 2, 2011 at 9:34 AM, ShinGei Yong <shingei.y...@gmail.com> wrote: Hi Roger, MVA on a MGCP control gateway is possible.In fact,that is a coexisting of both MGCP and H323 on the same gateway,but you could not used a MGCP control PRI for MVA. you may refer to Netpro for own interest. https://supportforums.cisco.com/thread/2005673 Shingei. On Sun, Jan 2, 2011 at 11:16 PM, Shrini <linuxbos...@gmail.com> wrote: Hi ShinGei , bkvalentine, Rogers et al I remember it was successful last time when I configured it another lab when HQ was h323. Now I was confused around dial-peers hence had the question. I will give a try now with MGCP + H323 on HQ and it should work. Thanks all. Shrini From: ShinGei Yong [mailto:shingei.y...@gmail.com] Sent: Sunday, January 02, 2011 6:42 AM To: Shrini; ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Mobile Voice Access Hi Shrini, What about your UCM configuration? 1.> is your H323 GW registered with UCM? 2.> what is your dialing behavior internally?4 or 10?if is 4, then your in & outbound dp should be 4 digit patten as well instead of 10. Please provide more info Shingei On Sun, Jan 2, 2011 at 4:13 PM, Shrini <linuxbos...@gmail.com> wrote: Hi Experts, "Wish you all a Happy and Prosperous New Year 2011" First question this year :-) HQ Site is MGCP. When I call HQ Phone 5002 , HQ PSTN is ringing -- > all is good. I have configured MVA number 5999 in service parameters and Media Resources --> MVA --> 5999 / PT-INTERNAL / English on router. application service cmm http://177.1.10.10:8080/ccmivr/pages/IVRMainpage.vxml ! ! dial-peer voice 5999 pots service cmm incoming called-number 2123945999 no digit-strip Also on CUCM : But when I call 2123945999 from HQ PSTN 2123942123 I am getting fast busy tone. It is not invoking the vxml script. What am I doing wrong here ? TIA Shrini _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
<<image001.gif>>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com