i'm assuming it will on the output they're not asking for priority if you remove the priority from the zone prefix, by default it sill show as gk-trunk_2, then gk-trunk_1
2011/1/14 Leslie Meade <lme...@signal.ca> > The previous question is this, > > > > The gw-type-prefix table on the gatekeeper should be as shown- only the > items in bold are important > > > > HQ-RTR(config-gk)#do sh gatekeeper gw > buffer used: 510, size: 20480 > GATEWAY TYPE PREFIX TABLE > ========================= > Prefix: *1#** (Default gateway-technology) > Zone *UCM *master gateway list: > *10.10.200.20*:53373 *gk-trunk_2* > *10.10.200.10*:47991 *gk-trunk_1* > Zone* UCME* master gateway list: > *10.10.110.3:1720 BR2-RTR* > > * * > > So buy my guess this breaks the above requirement ? > > > > HQ-RTR(config-gk)#do sh gatekeeper gw > buffer used: 510, size: 20480 > GATEWAY TYPE PREFIX TABLE > ========================= > Prefix: 1#* (Default gateway-technology) > Zone UCM master gateway list: > 10.10.200.20:53373 gk-trunk_2 > 10.10.200.10:47991 gk-trunk_1 > Zone UCM prefix 1... priority gateway list(s): > Priority 10: > 10.10.200.20:53373 gk-trunk_2 > Priority 9: > 10.10.200.10:47991 gk-trunk_1 > Zone UCM prefix 5... priority gateway list(s): > Priority 10: > 10.10.200.20:53373 gk-trunk_2 > Priority 9: > 10.10.200.10:47991 gk-trunk_1 > Zone UCME master gateway list: > 10.10.110.3:1720 BR2-RTR > > > > > > *From:* Shrini [mailto:linuxbos...@gmail.com] > *Sent:* Friday, January 14, 2011 12:38 AM > *To:* Leslie Meade; ccie_voice@onlinestudylist.com > *Subject:* RE: [OSL | CCIE_Voice] Volume 2 Lab 1 4.3 > > > > Hi Leslie, > > > > As per the zone prefix 1... the display is correct and any calls matching > prefix 1... will got to gk-trunk_2 on top priority. > > What is the previous question which must not be invalidate ? > > > > -Shrini > > > ------------------------------ > > *From:* ccie_voice-boun...@onlinestudylist.com [mailto: > ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Leslie Meade > *Sent:* Thursday, January 13, 2011 9:15 PM > *To:* ccie_voice@onlinestudylist.com > *Subject:* [OSL | CCIE_Voice] Volume 2 Lab 1 4.3 > > I have got this working but the display is not what it should be > > I have the zone prefix 1... gw-prioity 10 gk-trunk_2 commands in but when I > do a sh gatekeeper gw I see them in the output. > > The question says it must not invalidate the previous question. So am I > wrong ? > > > > HQ-RTR(config-gk)#do sh gatekeeper gw > buffer used: 510, size: 20480 > GATEWAY TYPE PREFIX TABLE > ========================= > Prefix: 1#* (Default gateway-technology) > Zone UCM master gateway list: > 10.10.200.20:53373 gk-trunk_2 > 10.10.200.10:47991 gk-trunk_1 > Zone UCM prefix 1... priority gateway list(s): > Priority 10: > 10.10.200.20:53373 gk-trunk_2 > Priority 9: > 10.10.200.10:47991 gk-trunk_1 > Zone UCM prefix 5... priority gateway list(s): > Priority 10: > 10.10.200.20:53373 gk-trunk_2 > Priority 9: > 10.10.200.10:47991 gk-trunk_1 > Zone UCME master gateway list: > 10.10.110.3:1720 BR2-RTR > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com