It's in the CUCM 7x SRND which is also available in the lab. http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/uc7_0.html
On 19 January 2011 19:58, mihal caro <mihalc...@gmail.com> wrote: > Hi Miron > > > thanks for the reply > > I've try ed Sip-Notify same issue. I can get it work with h323. I can > always add the gateway as h323 and SIP but I just want make sure that Cisco > will not remove any points from my lab test because of that. > > Roger > > Can you please send me that Cisco link that says SIP VXML gateways requires > Unified CM 7.1(3) or later release. Because if that is the case then I have > no option but to add the the gateway as H323 and SIP to make the MVA work. > > regards. > > > > On 19 January 2011 16:15, Miron Kobelski <findko...@gmail.com> wrote: > >> One more thing: >> http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg16921.html >> >> You can always add the same physical router as 2 logical gateways on CUCM >> by binding SIP/H.323/MGCP signaling to different interfaces. >> >> >> On Wed, Jan 19, 2011 at 15:34, mihal caro <mihalc...@gmail.com> wrote: >> >>> Hi All >>> >>> I'm having problems with the Cisco MVA when is set it up on the SIP >>> gateway but with H323 it works great. >>> >>> I can get the IVR working with SIP but when I press 1 to dial an internal >>> extension nothing happens and the call drops after 10 sec. If I try the same >>> thing but change the dial-peer to h323 and dtmf-relay h245-alphanumeric then >>> it works. >>> >>> I'm just wondering if I will get the same problem on the voice lab and >>> how do i configure the gateway, H323 or SIP because Cisco may ask me to >>> add the gateway as SIP and then if change it back to h323 to make the MVA >>> work I may loose points. >>> >>> >>> any advice please >>> >>> >>> regards. >>> >>> >>> >>> >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, please >>> visit www.ipexpert.com >>> >>> >> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
