Yes incoming called-number 1999.. Will work for MWI.
From: Mritunjay Kumar [mailto:mjs...@gmail.com] Sent: 20 January 2011 13:48 To: Ashar Siddiqui Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] how to set mwi on/off number in unity express Hi Ashar , thanks for reply. i had configured same config and it was not working until i added following dial-peer dial-peer voice 100 voip codec g711ul incoming called 199..... ses pro sip what i observed through ccsip message that cue dials 1990(1)2000 (2000 is subs ext) which works only when it is received by sip voip dial-peer which has codec g711 setting. i did not find any doc which tell this and was wondering whether same works without creating any dial-peer ... any thought ? Regards, Mritunjay On Thu, Jan 20, 2011 at 6:30 PM, Ashar Siddiqui <siddas...@gmail.com> wrote: You will have to create mwi on and mwi off ephone dn. Let's say: ephone-dn 8 number 1990.... mwi on ! ! ephone-dn 9 number 1991.... mwi off ! ! If you want to set MWI on, dial 19902601 and it should turn the light on (2601 being any ext.) Ash> From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Mritunjay Kumar Sent: 20 January 2011 10:25 To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] how to set mwi on/off number in unity express Hi All, Need some config help Here is my config on CME And unity express and it works perfectly ie mwi on /off ephone-dn 1 number 4000 // this is ext of subcriber mwi sip sip-ua mwi-server ipv4:14.160.115.196 unsolicited in cue ccn subsystem sip gateway address "14.160.115.195" dtmf-relay rtp-nte mwi sip sub-notify end subsystem this config works ie mwi on /off works but i want to set the mwi on / off number to specific number ie 2222/2223 i changed this value in cue ccn application ciscomwiapplication aa description "ciscomwiapplication" enabled maxsessions 6 script "setmwi.aef" parameter "CallControlGroupID" "0" parameter "strMWI_OFF_DN" "2222" parameter "strMWI_ON_DN" "2223" end application but mwi does not use these value (verified in debug ccsip message) it always uses subscriber ext. what other things need to be changed ? Regards, Mritunjay
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com