Thanks I'll try it in a few days Sent from my iPhone
On Jan 23, 2011, at 6:18 AM, Justin Brady <[email protected]> wrote: > Here is my config on an 1841. Works like a champ. > > version 12.4 > service timestamps debug datetime > service timestamps log datetime > service password-encryption > ! > hostname EZVPN-Router > ! > boot-start-marker > boot-end-marker > ! > logging buffered 512000 informational > enable secret <removed> > ! > no aaa new-model > ip cef > ! > ! > no ip dhcp use vrf connected > ip dhcp excluded-address 192.168.10.1 192.168.10.60 > ! > ip dhcp pool DHCP-Pool > import all > network 192.168.10.0 255.255.255.0 > option 150 ip 10.10.110.3 > default-router 192.168.10.1 > dns-server 8.8.4.4 8.8.8.8 > domain-name proctorlabs.com > lease 8 > ! > ! > ip domain name ipexpert.com > ip auth-proxy max-nodata-conns 3 > ip admission max-nodata-conns 3 > ! > ! > ! > username proctorlabs privilege 15 password 7 0706314956191C17031A040101 > ! > ! > ip ssh version 2 > ! > ! > crypto isakmp policy 10 > encr 3des > authentication pre-share > group 2 > ! > ! > ! > ! > ! > crypto ipsec client ezvpn Voice-vRack > connect manual > group vpodgroup key proctorvoice > mode network-extension > peer 74.126.20.247 > xauth userid mode interactive > ! > ! > ! > interface Loopback0 > ip address 10.10.100.15 255.255.255.255 > ! > interface FastEthernet0/0 > description (Outside Public Interface) > ip address dhcp > no ip unreachables > ip mtu 1300 > ip nat outside > ip virtual-reassembly > duplex auto > speed auto > no cdp enable > crypto ipsec client ezvpn Voice-vRack > ! > interface FastEthernet0/1 > description (Inside Private Interface) > ip address 192.168.10.1 255.255.255.0 > ip nat inside > ip virtual-reassembly > duplex auto > speed auto > crypto ipsec client ezvpn Voice-vRack inside > ! > interface Serial0/0/0 > no ip address > shutdown > no fair-queue > ! > interface Virtual-Template1 type tunnel > ip unnumbered Loopback0 > tunnel mode ipsec ipv4 > ! > ip forward-protocol nd > ip route 0.0.0.0 0.0.0.0 dhcp > ! > ! > no ip http server > no ip http secure-server > ip nat inside source list 101 interface FastEthernet0/0 overload > ! > access-list 101 deny ip 192.168.0.0 0.0.255.255 10.10.0.0 0.0.255.255 > access-list 101 permit ip 192.168.0.0 0.0.255.255 any > ! > ! > ! > control-plane > ! > ! > ! > line con 0 > logging synchronous > line aux 0 > line vty 0 4 > exec-timeout 30 0 > privilege level 15 > password <removed> > logging synchronous > login local > transport input telnet ssh > line vty 5 15 > exec-timeout 30 0 > privilege level 15 > password <removed> > logging synchronous > login local > transport input telnet ssh > ! > scheduler allocate 20000 1000 > ntp clock-period 17178316 > ntp server 17.151.16.20 > end > > Justin > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Stern, Larry > Sent: Sunday, January 23, 2011 4:19 AM > To: [email protected] > Cc: [email protected] > Subject: [OSL | CCIE_Voice] PL EZ VPN Config > > One other thing I do is to copy the PL EZ VPN running config to my routers > flash and load this file from flash to startup every time I do a lab . > > Sent from my iPhone > > On Jan 23, 2011, at 4:09 AM, [email protected] wrote: > >> Send CCIE_Voice mailing list submissions to >> [email protected] >> >> To subscribe or unsubscribe via the World Wide Web, visit >> http://onlinestudylist.com/mailman/listinfo/ccie_voice >> or, via email, send a message with subject or body 'help' to >> [email protected] >> >> You can reach the person managing the list at >> [email protected] >> >> When replying, please edit your Subject line so it is more specific >> than "Re: Contents of CCIE_Voice digest..." >> >> >> Today's Topics: >> >> 1. VPN router config to cut and paste into my rtr? (Randall Crumm) >> 2. Configuration examples (Semyon Taskin) >> 3. Re: Configuration examples (Rrcrumm) >> 4. Re: BLF in CME (Mritunjay Kumar) >> >> >> ---------------------------------------------------------------------- >> >> Message: 1 >> Date: Sat, 22 Jan 2011 16:46:06 -0800 (PST) >> From: Randall Crumm <[email protected]> >> To: "[email protected]" <[email protected]> >> Subject: [OSL | CCIE_Voice] VPN router config to cut and paste into my >> rtr? >> Message-ID: <[email protected]> >> Content-Type: text/plain; charset="iso-8859-1" >> >> HI, >> I was wondering if someone could email me a .txt file with the config so I >> can just cut and paste it into my rtr? >> ? >> The download on the web has no formatting. >> ? >> Thanks, >> Randall >> ? >> ? >> >> >> >> -------------- next part -------------- >> An HTML attachment was scrubbed... >> URL: >> </archives/ccie_voice/attachments/20110122/aa8d9c3a/attachment-0001.html> >> >> ------------------------------ >> >> Message: 2 >> Date: Sun, 23 Jan 2011 17:18:06 +1100 >> From: Semyon Taskin <[email protected]> >> To: [email protected] >> Subject: [OSL | CCIE_Voice] Configuration examples >> Message-ID: >> <[email protected]> >> Content-Type: text/plain; charset="iso-8859-1" >> >> Guys, >> >> Are we allowed to use configuration examples - the ones in official cisco >> online documentation provided in the exam? >> >> -- >> Regards, >> Semyon >> -------------- next part -------------- >> An HTML attachment was scrubbed... >> URL: >> </archives/ccie_voice/attachments/20110123/caddaf79/attachment-0001.html> >> >> ------------------------------ >> >> Message: 3 >> Date: Sat, 22 Jan 2011 23:49:59 -0800 >> From: Rrcrumm <[email protected]> >> To: Semyon Taskin <[email protected]> >> Cc: "[email protected]" <[email protected]> >> Subject: Re: [OSL | CCIE_Voice] Configuration examples >> Message-ID: <[email protected]> >> Content-Type: text/plain; charset=us-ascii >> >> It was actually recommended to use the documentation of needed. An example >> is iOS conferencing >> >> Sent from my iPhone >> >> On Jan 22, 2011, at 10:18 PM, Semyon Taskin <[email protected]> wrote: >> >>> Guys, >>> >>> Are we allowed to use configuration examples - the ones in official cisco >>> online documentation provided in the exam? >>> >>> -- >>> Regards, >>> Semyon >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, please >>> visit www.ipexpert.com >> >> >> ------------------------------ >> >> Message: 4 >> Date: Sun, 23 Jan 2011 13:37:05 +0530 >> From: Mritunjay Kumar <[email protected]> >> To: Roger K?llberg <[email protected]> >> Cc: "[email protected]" <[email protected]>, >> Shrini <[email protected]> >> Subject: Re: [OSL | CCIE_Voice] BLF in CME >> Message-ID: >> <[email protected]> >> Content-Type: text/plain; charset="iso-8859-1" >> >> Hi All , >> >> I am facing similar issue on cucm. >> >> line 2 of phone is able to monitor the status of line 1 of phone1 ie blf >> turns red for active call/off hook but not working ie BLF does not turn >> red when DND is pressed on phone 1 . >> Any other config is required ? >> >> Regards, >> Mritunjay >> >> 2011/1/22 Roger K?llberg <[email protected]> >> >>> Hi Shrini! >>> >>> I don't get why you would update to CME 7.1? That is *not* the version of >>> CME that you will have in the lab, so why even bother? >>> >>> You are right in that this works different in CME than in UCM, but that is >>> the case for others things as well. It's just something that you need to >>> know and deal with. >>> >>> You have got multiple answers for a configuration that meets the >>> requirements in your original question. Evaluate these and understand the >>> differences for how this is works on both platforms. >>> >>> Just my 2 cents >>> >>> Sincerely >>> >>> *Roger K?llberg* >>> CCIE #26199 (Voice) >>> Consultant >>> Cygate AB >>> Eric Perssons v?g 21, SE-217 62 MALM? >>> >>> ------------------------------ >>> *Fr?n:* Shrini [[email protected]] >>> *Skickat:* den 22 januari 2011 00:32 >>> *Till:* 'Adam Thompson'; [email protected] >>> *?mne:* Re: [OSL | CCIE_Voice] BLF in CME >>> >>> Hi Adam, >>> >>> Below config is working. But if I add button 3:2 under ephone 1, then it is >>> turning red even if I press line 3 (shared line) on ephone 1. >>> In call manager it is not like this. >>> >>> ephone-dn 1 oct >>> number 1000 no-reg >>> name Line1 Phn1 >>> >>> ephone-dn 2 oct >>> number 1001 no-reg >>> name Line2 Phn1 >>> >>> ephone-dn 3 oct >>> number 1002 no-reg >>> name Line1 Phn2 >>> >>> ephone 1 >>> mac 1111.2222.3333 >>> button 1:1 2:2 >>> ... >>> >>> ephone 2 >>> mac 4444.5555.6666 >>> button 1:3 *2w1 3:2 ---> * >>> ** >>> To my understanding w will watch the entire phone. >>> >>> I am using CME7.0 and as per this doc >>> >>> http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmepres.html#wp1022428 >>> >>> >>> blf will monitor single line and dnd with CME 7.1, I will try upgrading. >>> >>> Thanks >>> Shrini >>> ------------------------------ >>> *From:* [email protected] [mailto: >>> [email protected]] *On Behalf Of *Adam Thompson >>> *Sent:* Friday, January 21, 2011 1:47 PM >>> *To:* [email protected] >>> *Subject:* Re: [OSL | CCIE_Voice] BLF in CME >>> >>> Shrini, >>> >>> You will want to setup your CME configuration something like this: >>> >>> ephone-dn 1 oct >>> number 1000 no-reg >>> name Line1 Phn1 >>> >>> ephone-dn 2 oct >>> number 1001 no-reg >>> name Line2 Phn1 >>> >>> ephone-dn 3 oct >>> number 1002 no-reg >>> name Line1 Phn2 >>> >>> ephone 1 >>> mac 1111.2222.3333 >>> button 1:1 2:2 >>> ... >>> >>> ephone 2 >>> mac 4444.5555.6666 >>> button 1:3 *2w1* >>> ... >>> >>> This will allow you to watch Phone 1 Line 1 using your button2 on Phone >>> 2. You will get idle/off-hook/DnD for only this line. >>> >>> HTH >>> -Adam >>> >>> >>> On Fri, Jan 21, 2011 at 2:50 PM, Shrini <[email protected]> wrote: >>> >>>> Hi Team, >>>> >>>> I configured BLF on CUCM and I wanted to get it worked in the same way in >>>> CME too. >>>> >>>> Scenario: >>>> >>>> I have two lines on the phone. >>>> >>>> In CUCM when I configure BLF for Line 1 and it works as expected. >>>> BLF flickers for incoming call , turn red in active call / off hook / DnD. >>>> >>>> But on CME. >>>> >>>> There are two options : >>>> >>>> blf or watch >>>> >>>> If I do blf it only lits red when active / off hook not with DnD. >>>> >>>> If I do watch phone it lits in all conditions as mentioned above in CUCM >>>> excepts incoming call but It watched line 2 also. >>>> >>>> How can I configure same exacltly like it is working on CUCM. >>>> >>>> >>>> http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmepres.html#wp1022428 >>>> >>>> In the above documentation it is mentioned that BLF does not work for DnD >>>> in CME 7.0 >>>> >>>> Please advice >>>> >>>> T I A >>>> Shrini >>>> >>>> _______________________________________________ >>>> For more information regarding industry leading CCIE Lab training, please >>>> visit www.ipexpert.com >>>> >>>> >>> >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, please >>> visit www.ipexpert.com >>> >>> >> -------------- next part -------------- >> An HTML attachment was scrubbed... >> URL: </archives/ccie_voice/attachments/20110123/d331787c/attachment.html> >> >> ------------------------------ >> >> _______________________________________________ >> CCIE_Voice mailing list >> [email protected] >> http://onlinestudylist.com/mailman/listinfo/ccie_voice >> >> >> End of CCIE_Voice Digest, Vol 59, Issue 192 >> ******************************************* > > This email and any files transmitted with it are confidential and are > intended for the sole use of the individual(s) to whom they are properly > addressed. Any use, dissemination or forwarding of this email and any > files transmitted with it by anyone other than the intended recipient(s) > is strictly prohibited. If you have received this email in error, please > notify the sender by replying to this email. Black Box Corporation and > its affiliates reserve the right to scan and monitor all e-mail traffic. > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
