Hi Miron
 
 
Very strange …
 
Fot this lab, I had an issue with rsvp as well, but not the same pb. In the 
dspfarm configured as mtp,  I put the codec pass-through command line to have 
an ILBC negotiation. Without this command, g729 codec negotiation instead.
 
But your negotiation iLBC seems to work
 
Alerting  47.2 kbps, round up to 48k
Connected should be 31.2 kbps for 1 call you have 31k…. fine
 
Same results with debug ip rsvp signaling ??
 
 
Claude Friderich
PreSales Support
 
NETCORE PSF S.A.
49 rue du Baerendall
B.P.65 L-8201 Mamer
Téléphone: 31 33 80-407
Fax: 31 33 80 8-407
GSM: 621 303 616
E-mail: cfrider...@netcore.lu <mailto:cfrider...@netcore.lu> 
 
From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Miron Kobelski
Sent: mardi 25 janvier 2011 21:20
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Two RSVP reservations for a single iLBC call?
 
Hello,

I'm working on vol2 lab8. QoS task requiresRSVP locations based CAC between HQ 
and BR1.
I configured it as usually, but I get strange results when I make a single call 
between the 2 sites:

Before the call:
RS30-CCIE#sh ip rsvp installed 
RSVP: Serial0/0/0 has no installed reservations
RSVP: Serial0/0/0.30 has no installed reservations

In alerting phase:
RS30-CCIE#sh ip rsvp installed 
RSVP: Serial0/0/0.30
BPS    To              From            Protoc DPort  Sport  Weight Conversation
76K    10.225.101.254  10.30.101.254   UDP    17270  16410  6      266   
48K    10.225.101.254  10.30.101.254   UDP    18160  16524  9      265   

When connected:
RS30-CCIE#sh ip rsvp installed 
RSVP: Serial0/0/0.30
BPS    To              From            Protoc DPort  Sport  Weight Conversation
76K    10.225.101.254  10.30.101.254   UDP    17270  16410  6      266   
31K    10.225.101.254  10.30.101.254   UDP    18160  16524  14     265   

After disconnecting the call:
RS30-CCIE#sh ip rsvp installed 
RSVP: Serial0/0/0 has no installed reservations
RSVP: Serial0/0/0.30 has no installed reservations

I can't explain, why CUCM makes 2 reservation for single iLBC call. AFAIK, it 
should be 48K in alerting and 31K in connected states.
But why do I get this 76K? I configured everything as usually: RSVP 
reservations are optional, traffic should be remarked to CS1 when no bandwidth 
is available.
RSVP agents are invoked correctly... 

Any ideas?

regards
kobel
 
-- 
This email was Anti Virus checked. 

<<image001.gif>>

_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to