Hi, you have to add the command:
se-172-22-132-253(config)# ccn subsystem sip se-172-22-132-253(config-sip)# mwi sip outcall Cheers Steffen ________________________________________ Von: ccie_voice-boun...@onlinestudylist.com [ccie_voice-boun...@onlinestudylist.com] im Auftrag von Mritunjay Kumar [mjs...@gmail.com] Gesendet: Sonntag, 23. Januar 2011 09:20 An: ccie_voice@onlinestudylist.com Betreff: [OSL | CCIE_Voice] Integration of CUE and CUCM : MWI ON/OFF Hi All , i am able to integrate CUE and CUCM and it is working as expected including MWI on/off. but unable to figure out how to set " MWI ON/OFF DN " if this is the requirement ! config on cue ccn subsystem jtapi ctiport 5555 6666 ccm-manager address 14.160.108.10 ccm-manager credentials hidden "G2Zv4Op2jjz5S/06Uc99p0nfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmP" end subsystem ccn subsystem sip gateway address "14.160.115.200" mwi sip unsolicited // if phones goes to SRST mode , MWI ON/OFF will work if unsolicited is configured end subsystem cli parameter "strMWI_OFF_DN" "8001" parameter "strMWI_ON_DN" "8000" does not help. MWI DN on CUCM is used with UC not with cue which i verified by looking into traces. Any suggestion ? Regards, Mritunjay _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com