Hello Guys, Does anybody already encountered the problem with Virtual access ?? Let me explain ..... As I configure qos with MLP LFI between hq and br2 everything was working fine !!! After rebooting, no serial access anymore between hq and br2..... With show ip interface brief I have the following protocol state : HQ Interface IP-Address OK? Method Status Protocol Virtual-Access1 10.10.112.1 YES TFTP up down BR2 Interface IP-Address OK? Method Status Protocol Virtual-Access1 10.10.112.2 YES TFTP up down It's not the first time !!! I tried to change the IOS but in vain. The same behavior with IOS 12.4(20)T2,T1 and 12.4(24)T2. If something like this happens during the lab, what can I do ???? Just ask the proctor and tell him that I have an unexpected behavior and that I'm sure about the qos config ? I have usually this type of behavior after rebooting my routers. Any comments or solutions would be appreciated. Regards Claude. Claude Friderich PreSales Support NETCORE PSF S.A. 49 rue du Baerendall B.P.65 L-8201 Mamer Téléphone: 31 33 80-407 Fax: 31 33 80 8-407 GSM: 621 303 616 E-mail: cfrider...@netcore.lu <mailto:cfrider...@netcore.lu>
-- This email was Anti Virus checked. Disclaimer The information in this Internet e-mail is confidential and may be legally privileged. It is intended solely for the addressee. Access to this Internet e-mail by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this e-mail are subject to the terms and conditions expressed in our governing terms of business.
<<image001.gif>>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
