Could we maybe write EEM script???

that would check if MLP is down, and do the necessary steps to bring it up?
It's a bit of overreaction I think, because the Proctors are probably very
much aware of the problem.

Regards,

On Tue, Feb 22, 2011 at 9:52 AM, Stutz, Bernhard <st...@pandacom.de> wrote:

>  Why should your proctor reboot the router?
>
> I would imagine that the proctors know about this bug otherwise nobody will
> ever solve this lab where this questions comes up with (if they really
> reboot the routers) and I think that should make them mindful.
>
>
>
> *Von:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *Im Auftrag von *Friderich Claude
> *Gesendet:* Dienstag, 22. Februar 2011 07:07
> *An:* Ilya Rubinchik; Miron Kobelski; Roger Källberg; ccieid...@gmail.com
>
> *Cc:* ccie_voice@onlinestudylist.com;
> ccie_voice-boun...@onlinestudylist.com
> *Betreff:* [OSL | CCIE_Voice] RE : BUG ????? QoS with MLP LFI
>
>
>
> and imagine a similar question during the lab and Proctor reboots your
> routers before testing your config.
> you gonna get a zero not only for the QoS question because the branch
> router will not be accessible anymore ....
>
> I tried with different ios but what I know is that during the lab they
> should use the IOS 12.4(20)T2
> and see below 12.4(24)T2, same behaviour ....
>
> Regards,
>
> Claude
> -------- Message d'origine--------
> De: Ilya Rubinchik 
> [mailto:ilya.rubinc...@followmars.com<ilya.rubinc...@followmars.com>
> ]
> Date: mar. 2/22/2011 5:32
> À: Friderich Claude; Miron Kobelski; Roger Källberg; ccieid...@gmail.com
> Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
> Objet : RE: [OSL | CCIE_Voice] BUG ????? QoS with MLP LFI
>
> I saw the same multiple times. Checked all configs with R&S CCIE sitting
> near, but nothing helped.
> Probably it's just IOS issue. ?
>
>
> --
> Best regards,
> Ilya Rubinchik
> Chief UC Engineer
> Mars Solutions Ltd.
>
> Skype: im_citius
> Mob: +998 (97) 712-8456
> Office: +998 (71) 290-7364
>
> From: ccie_voice-boun...@onlinestudylist.com [
> mailto:ccie_voice-boun...@onlinestudylist.com<ccie_voice-boun...@onlinestudylist.com>]
> On Behalf Of Friderich Claude
> Sent: Tuesday, February 22, 2011 1:42 AM
> To: Miron Kobelski; Roger Källberg; ccieid...@gmail.com
> Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
> Subject: Re: [OSL | CCIE_Voice] BUG ????? QoS with MLP LFI
>
> Hello guys,
>
> First, thanks a lot guys for your reply.
>
> For Miron,
>
> Respecting your different steps, it works and virtual-access becomes up
> immediately ?
> But after rebooting the routers, down again ?
>
> I have configured the MLP LFI manually instead of  using auto-qos ..  The
> same behavior . reboot .. Protocol down
>
> Finally, Miron a quicker step while  conserving auto qos config on each
> site :
> interface Serial0/1/0.1 point-to-point
> bandwidth 768
> ip ospf mtu-ignore
> snmp trap link-status
> no  frame-relay interface-dlci 102 ppp Virtual-Template100 wing steps :
>
> interface Serial0/1/0
> shutdown
> no ip address
> encapsulation frame-relay IETF
> frame-relay traffic-shaping
> frame-relay lmi-type ansi
> ip rsvp bandwidth
>
> and no shut and frame-relay again of course
>
> For Roger and ccieid1ot, hereby my config if you have any comments, don't
> hesitate
>
> Thanks in advance,
>
> Regards
>
> Claude Friderich
> PreSales Support
> [ccvp_voice_sm]
> NETCORE PSF S.A.
> 49 rue du Baerendall
> B.P.65 L-8201 Mamer
> Téléphone: 31 33 80-407
> Fax: 31 33 80 8-407
> GSM: 621 303 616
> E-mail: 
> cfrider...@netcore.lu<mailto:cfrider...@netcore.lu<cfrider...@netcore.lu>
> >
>
> From: Miron Kobelski [mailto:findko...@gmail.com <findko...@gmail.com>]
> Sent: lundi 21 février 2011 17:30
> To: Friderich Claude
> Cc: ccie_voice-boun...@onlinestudylist.com; ccie_voice@onlinestudylist.com
> Subject: Re: [OSL | CCIE_Voice] BUG ????? QoS with MLP LFI
>
> Claude,
>
> I've seen this happen. What I'd recommend:
>
> sh run (to keep old config)
> no frame-relay interface-dlci X (to remove all fr config)
> shut interface (to remove DLCIs learned from the FR switch)
> frame-relay interface-dlci X
> no shut
> auto qos ...
>
> then, check show ppp multilink ... to verify if multilink bundles are
> active.
>
> let us know... any better ideas?
>
> regards
> kobel
>
>
>
>
> On Mon, Feb 21, 2011 at 16:25, Friderich Claude <cfrider...@netcore.lu<
> mailto:cfrider...@netcore.lu <cfrider...@netcore.lu>>> wrote:
> Hello Guys,
>
> Does anybody  already encountered the problem with Virtual access  ??
>
> Let me explain ...
>
> As I configure qos with MLP LFI between hq and br2 everything was working
> fine !!!
>
> After rebooting, no serial access anymore between hq and br2...
>
> With  show ip interface brief I have the following protocol state :
>
> HQ
> Interface                             IP-Address
> OK?                       Method               Status
> Protocol
> Virtual-Access1                 10.10.112.1
> YES                        TFTP
> up                           down
>
> BR2
> Interface                             IP-Address
> OK?                       Method               Status
> Protocol
> Virtual-Access1                 10.10.112.2
> YES                        TFTP
> up                           down
>
> It's not the first time !!! I tried to change the IOS but in vain.  The
> same behavior with IOS 12.4(20)T2,T1  and 12.4(24)T2.
>
> If something like this happens during the lab, what can I do ????  Just ask
> the proctor and tell him that I have an unexpected behavior and that I'm
> sure about the qos config ?
>
> I have usually this type of behavior after rebooting my routers.
>
> Any comments or solutions would be appreciated.
>
> Regards
>
> Claude.
>
> Claude Friderich
> PreSales Support
> [ccvp_voice_sm]
> NETCORE PSF S.A.
> 49 rue du Baerendall
> B.P.65 L-8201 Mamer
> Téléphone: 31 33 80-407
> Fax: 31 33 80 8-407
> GSM: 621 303 616
> E-mail: 
> cfrider...@netcore.lu<mailto:cfrider...@netcore.lu<cfrider...@netcore.lu>
> >
>
>
> --
>
> This email was Anti Virus checked.
>
>
>
> Disclaimer
>
> The information in this Internet e-mail is confidential and may be legally
> privileged. It is intended solely for the addressee. Access to this Internet
> e-mail by anyone else is unauthorized. If you are not the intended
> recipient, any disclosure, copying, distribution or any action taken or
> omitted to be taken in reliance on it, is prohibited and may be unlawful.
>
> When addressed to our clients any opinions or advice contained in this
> e-mail are subject to the terms and conditions expressed in our governing
> terms of business.
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com<http://www.ipexpert.com>
>
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to