George, if there isn't a redistribute static command, then you won't lose all sites.
duy ccie #27737 voice tmobile g2 On Feb 26, 2011 5:29 AM, "George Goglidze" <gogli...@gmail.com> wrote: > shutting down WAN does not help on proctorlabs, as you are supposed to have > a few Soft Phones connected from your PC. > I put an access-list on HQ router: > > access-list 101 deny tcp host <your_pc_ip> any eq 2000 !!This will block > the softphone from registering > access-list 101 deny host <br1/br2 router loopback> any !! this will > block MGCP/h323 from being able to communicate with CUCM. > access-list 101 permit ip any any > > inte F0/0.30 > ip access-group 101 out > > Hope this helps, > > On Sat, Feb 26, 2011 at 6:21 AM, Chevy <chevy.man...@gmail.com> wrote: > >> Just shut down the WAN interface at the branch. >> >> Thanks, >> >> Chevy >> On Feb 25, 2011 11:01 PM, "Erwan Erwan" <e_er...@yahoo.com> wrote: >> > hi guys, >> > >> > h >> > What is the quickest way to test SRST in proctorlab ? >> > >> > 1. I felt that using the button menu "SRST" take some time before go to >> SRST and back to normal mode >> > >> > 2. if I use " CCM Group" that just contain " PUB or SUB", it also take >> sometime (at least 3 minute). And most of time , I have to enable and >> disable the "Call Manager service" >> > >> > >> > Thanks in adv for tips >> > >> > Rgds >> > erwan >> > >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
