you also will need to disable two sip supplementary services: "refer" and "moved temporarily".
On Mon, Feb 28, 2011 at 2:31 PM, George Goglidze <gogli...@gmail.com> wrote: > Hi Friderich, > > The SIP server has to be Unity Connection. > Try it out, it should work. > > Regards, > > > On Mon, Feb 28, 2011 at 1:08 PM, Friderich Claude > <cfrider...@netcore.lu>wrote: > >> Hi all, >> >> >> >> Thanks for reply and your suggestions >> >> >> >> Effectively I’m doing a Cisco Unity Connection Integration not CUE. >> Imagine CUE isn’t present. >> >> >> >> Good Question Shingei J >> >> why CUCME IP address instead of CUC ??? >> >> >> >> Normally you have to put the CUC IP Address in mwi server when you >> integrate CUC with CUCME in a SIP configuration. >> >> >> >> But with SCCP integration and with SIP phones configured on CUCME, I think >> it’s correct, we have to put the CUCME ip address in mwi-server. >> >> >> >> Best Regards, >> >> >> >> Claude. >> >> >> >> *Claude Friderich* >> >> *PreSales Support* >> >> *[image: ccvp_voice_sm]*** >> >> *NETCORE PSF S.A.*** >> >> 49 rue du Baerendall >> >> B.P.65 L-8201 Mamer >> >> Téléphone: 31 33 80-407 >> >> Fax: 31 33 80 8-407 >> >> GSM: 621 303 616 >> >> E-mail: cfrider...@netcore.lu >> >> >> >> *From:* ShinGei Yong [mailto:shingei.y...@gmail.com] >> *Sent:* lundi 28 février 2011 08:42 >> *To:* Romain; Friderich Claude; OSL Questions >> *Subject:* Re: [OSL | CCIE_Voice] CUC - CUCME - SCCP Integration - MWI >> issue on SIP Phones !!!! >> >> >> >> My fren, >> >> Friderich is doing CUC integration with UCME, not CUE. >> >> Is there any reason that you mwi server to be 202.1 instead of CUC >> address? >> >> Shingei >> >> On Mon, Feb 28, 2011 at 11:25 AM, Romain <romain.mull...@gmail.com> >> wrote: >> >> Isn't your CUE at 10.10.202.2 ? That is the IP you need for your mwi >> server instead of .1 >> >> >> >> Sent from my iPhone >> >> >> On Feb 27, 2011, at 8:12 PM, "Friderich Claude" <cfrider...@netcore.lu> >> wrote: >> >> Hello, >> >> >> >> After a couple of tests and after trying to configure this feature, >> impossible to make it work L >> >> >> >> MWI on sccp phone is working fine >> >> MWI on SIP phone doesn’t work. >> >> >> >> Normaly in sip-ua >> >> *mwi-server ipv4:10.10.202.1 unsolicited* (CUCME IP Adress in >> telephony-service) >> >> >> >> In telephony-service >> >> *mwi relay* >> >> >> >> in the voice register dn 1 >> >> *mwi* >> >> >> >> >> >> *sip-ua * >> >> retry invite 3 >> >> timers trying 300 >> >> * mwi-server ipv4:10.10.202.1 expires 3600 port 5060 transport udp >> unsolicited* >> >> >> >> debug ccsip gives me the results below: >> >> >> >> >> >> Sent: >> >> NOTIFY sip:3005@10.10.202.50:5060;transport=udp SIP/2.0 >> >> Via: SIP/2.0/UDP 10.10.202.1:5060;branch=z9hG4bK8F14A9 >> >> From: <sip:3005@10.10.202.1>;tag=137E2EC-1A2C >> >> To: <sip:3005@10.10.202.50> >> >> Call-ID: 942D5193-420111E0-8216F0AE-E383DE3B@10.10.202.1 >> >> *CSeq: 101 NOTIFY* >> >> Max-Forwards: 70 >> >> Date: Sun, 27 Feb 2011 23:38:56 GMT >> >> User-Agent: Cisco-SIPGateway/IOS-12.x >> >> Event: message-summary >> >> Subscription-State: active >> >> Contact: <sip:3005@10.10.202.1:5060> >> >> Content-Type: application/message-summary >> >> Content-Length: 23 >> >> >> >> *Messages-Waiting: yes* >> >> >> >> Feb 27 23:38:56.959: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg: >> >> Received: >> >> *SIP/2.0 400 Bad Request* -------------------------------> >> ???????????????????????? >> >> Via: SIP/2.0/UDP 10.10.202.1:5060;branch=z9hG4bK8F14A9 >> >> From: <sip:3005@10.10.202.1>;tag=137E2EC-1A2C >> >> To: <sip:3005@10.10.202.50> >> >> Call-ID: 942D5193-420111E0-8216F0AE-E383DE3B@10.10.202.1 >> >> Date: Sun, 27 Feb 2011 23:38:55 GMT >> >> *Warning: 399 Bad MWI NOTIFY* -----------------------------> >> ????????????????????? >> >> CSeq: 101 NOTIFY >> >> Content-Length: 0 >> >> >> >> Does anybody encountered this problem concerning MWI on sip phones only >> ?? Does it really work ?? >> >> >> >> Any suggestions are appreciated. >> >> >> >> Regards >> >> >> >> Claude. >> >> >> >> >> >> >> >> *Claude Friderich* >> >> *PreSales Support* >> >> *<image001.gif>* >> >> *NETCORE PSF S.A.* >> >> 49 rue du Baerendall >> >> B.P.65 L-8201 Mamer >> >> Téléphone: 31 33 80-407 >> >> Fax: 31 33 80 8-407 >> >> GSM: 621 303 616 >> >> E-mail: cfrider...@netcore.lu >> >> >> >> -- >> >> This email was Anti Virus checked. >> >> >> >> Disclaimer >> >> The information in this Internet e-mail is confidential and may be legally >> privileged. It is intended solely for the addressee. Access to this Internet >> e-mail by anyone else is unauthorized. If you are not the intended >> recipient, any disclosure, copying, distribution or any action taken or >> omitted to be taken in reliance on it, is prohibited and may be unlawful. >> >> When addressed to our clients any opinions or advice contained in this >> e-mail are subject to the terms and conditions expressed in our governing >> terms of business. >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> >
<<image001.gif>>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com