Why would you need all those regions? ICD is in HQ Device Pool so traffic within the same region will be G711, CUE will be on the Br2 device pool so g7711 with thin that region. Since interegion codec is g729 calls from BR1 will cause transcoder to be invoked
On 8 March 2011 22:49, Rahul Kapor <rahul.kapo...@gmail.com> wrote: > > > Site b should be able to call ICD route point number 2400 , using g729 > > hq and site B IP phone shoud be able to call unity express voice mail usig > g729 > > we are allowed to configure 3 transcoding session per route2 > also , we need to configure only one two router by looking at the > requirement . marks wont be given it > transcoder is configured on all IOS router. > > My answer would be > > create 5 device pool and hence five diff region > > ie HQ , BR , ICD , CUE and TRA and apply to respective device > > to full fill the 1st requirement, > > I will apply the transcoder to ICD device pool and will make sure that > Region TRANS and ICD talk over g711 > and Region BR and ICD talk over g729 (this will invokde the transcoder) > > and for HQ and ICD , I will keep g711 so transcoder wont be invoked > > > > same approach for 2nd requirement > > ie i will apply the transcoder on the CUE device pool > > region setting HQ/BR and CUE will be g729 > > and Region setting btw CUE and transcoder will be g711 > > > I am not sure about 3rd requirement ie what will be resource (PVDM) in > real lab > > Please let me know about approach. > > thx, > Rahul > > > > > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
