if you telnet into the router, then ter mon, do you see the output in this way?
2011/3/20 ShinGei Yong <[email protected]> > Hi Wael, > > For you info,the inbound call from PSTN is working fine,it can reach all > the BR2 phones, > just that when nothing info display when i run the debug isdn q931. > > I can see the debug isdn q931 info on the PSTN router. > > Thanks > Shingei. > > > On Sun, Mar 20, 2011 at 8:06 PM, Wael Agina <[email protected]> wrote: > >> Dear Shingei, >> >> Asi understand you see output when you call outbound - callPSTN or other >> branch. >> So make sure that PSTN config is correct and that PSTN send the call to >> your BR2 rtr correctly. >> Check the debug on PSTN router side. >> >> Regards, >> Wael Agina >> >> On Sun, Mar 20, 2011 at 1:54 PM, ShinGei Yong <[email protected]>wrote: >> >>> Hi >>> >>> I'm facing an issue, which i've BR2 GW registered with HQ UCM as H323 GW. >>> When i enabled the "debug isdn q931"on BR2-RTR,there is no output from >>> console/terminal >>> while PSTN call to BR2 phone,but i can view the output when making call >>> from BR2 internal phone >>> to PSTN. >>> >>> In simple words, no inbound debug isdn info display, but yes for outbound >>> call to PSTN. >>> >>> What is the cause of this? >>> >>> Thanks >>> Shingei >>> >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, please >>> visit www.ipexpert.com >>> >>> >> >> >> -- >> >> Thanks and Best Regards, >> Wael Agina >> > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
