Try leaving the controller in a shutdown state until everything is configured. Then do a no shut on it. This seems to work for me every time.
-- On Apr 3, 2011, at 21:56, Naoufal Kerboute <naou...@mhdinfotech.com> wrote: > Hi gents, > > > > Please I need your help for the below. > > I’m always facing problem to get the MGCP gateway up, always the first time > register with the serial interface instead of the bind interface (loopback or > voice vlan int) that I specified in the config. I’ve tried to remove the isdn > bind-l3 ccm-manager and put it again, no mgcp and mgcp but it doesn’t help > until I remove sometime the hole config and do it again and again, reset… > > > > I’m missing something?? > > > > Thanks a lot. > > Naoufal > > > ********************************************************************************************************************************************************************************************************************* > * This Communication is Private & Confidential. This message and any > attachments may contain information that is privileged and / or confidential > and is the property of MHD InfoTech LLC. * > * It is intended solely for the person to whom it is addressed. If you are > not the intended recipient, you are hereby notified that you are not > authorized to read, print, retain copy, disseminate, distribute, or * > * use this message & any attachments or any part thereof. If you have > received this message in error, please notify the sender immediately and > delete the message and any attachments from your system. * > ********************************************************************************************************************************************************************************************************************* > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com