Hi Alex@ncs, While observing your config,i noticed that you've 3 zone defined under GK, which are UCM,UCME& VIA.
If i remember correctly,ur R3 which is ur CME site should registered to UCME instead of zone VIA right? Also, what is your region configuration on that pointed to GK? Thanks Shingei. On Sun, Apr 10, 2011 at 1:42 AM, Alex Goh <ncsalex....@gmail.com> wrote: > Hi Guys, > > I'm trying to get the solutions for question 4.2 to work, but > apparently I'm missing something and hope someone can help. > I've search thru the list but doesn't really found a solution work for my > case. > > The issue I've encounter are when HQ phone 5001 calling BR2 phone > 3003, 3003 ring, but when i tried to answered, the call drop. > I know it might be related to codec issue, but I've my HQ-RTR > configured with Xcoder which it is up and active but the call > still failing. I also did have the trunk in cucm "Wait for Far End > H.245 Terminal Capability Set" unchecked. > > once things I notice is that, my call doesn't seems get re-originated > on the cube router to BR2 router, what I see during ringing state > my "show gatekeeper endpoint" show the call is directly from the CUCM > to BR2 It is only 2 call legs instead of 4 (see below). > > hm, what have I missed? > > Some Info: > HQ Router (R1) > > interface Loopback0 > ip address 172.1.254.1 255.255.255.255 > h323-gateway voip interface > h323-gateway voip id VIA ipaddr 172.1.254.1 1719 > h323-gateway voip h323-id R1 > h323-gateway voip bind srcaddr 172.1.254.1 > > gatekeeper > zone local UCM 172.1.254.1 > zone local UCME outvia VIA > zone local VIA > zone prefix UCME 3... > gw-type-prefix 1#* default-technology > no shutdown > > dial-peer voice 30 voip > destination-pattern 3... > session target ras > codec g711ulaw > ! > dial-peer voice 31 voip > incoming called-number 3... > > Total number of active calls = 1. > GATEKEEPER CALL INFO > ==================== > LocalCallID Age(secs) BW > 511-32797 6 16(Kbps) > Endpt(s): Alias E.164Addr > src EP: gk_trunk_2 5001 > CallSignalAddr Port RASSignalAddr Port > 172.1.10.20 38233 172.1.10.20 32795 > Endpt(s): Alias E.164Addr > dst EP: R3 3003 > CallSignalAddr Port RASSignalAddr Port > 172.3.254.1 1720 172.3.254.1 49395 > > GATEKEEPER ENDPOINT REGISTRATION > ================================ > CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags > --------------- ----- --------------- ----- --------- ---- ----- > 172.1.10.10 47142 172.1.10.10 32838 UCM VOIP-GW > H323-ID: gk_trunk_1 > Voice Capacity Max.= Avail.= Current.= 0 > 172.1.10.20 38233 172.1.10.20 32795 UCM VOIP-GW > H323-ID: gk_trunk_2 > Voice Capacity Max.= Avail.= Current.= 0 > 172.1.254.1 1720 172.1.254.2 56974 VIA H323-GW > H323-ID: R1 > Voice Capacity Max.= Avail.= Current.= 0 > 172.3.254.1 1720 172.3.254.1 49395 VIA H323-GW > H323-ID: R3 > Voice Capacity Max.= Avail.= Current.= 0 > Total number of active registrations = 4 > > R1(config-if)#do sh gatek gw > GATEWAY TYPE PREFIX TABLE > ========================= > Prefix: 1#* (Default gateway-technology) > Zone UCM master gateway list: > 172.1.10.20:38233 gk_trunk_2 > 172.1.10.10:47142 gk_trunk_1 > Zone VIA master gateway list: > 172.3.254.1:1720 R3 > 172.1.254.2:1720 R1 > > BR2 Router (R2) > > interface Loopback0 > ip address 172.3.254.1 255.255.255.255 > h323-gateway voip interface > h323-gateway voip id VIA ipaddr 172.1.254.1 1719 > h323-gateway voip h323-id R3 > h323-gateway voip tech-prefix 1# > h323-gateway voip bind srcaddr 172.3.254.1 > > dial-peer voice 10 voip > incoming called-number 3... > dtmf-relay rtp-nte > codec g711ulaw > ! > > CUCM Trunk > the trunk was assign a separate DP with a region that using G729 when > calling HQ and BR2. > > > > Regards, > Alex > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
