Hi, First try to make a call from HQ and BR1 phones to CUE directly without AAR, once is OK then assign the AAR group and Css to all phones and CTI ports, set the mask XXXX on the voicemail profile and test. Make sure to have RP that can route the external phone number musk trough the local gateway.
I think it should work. Rgds, Naoufal From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Cristobal Priego Sent: Monday, April 18, 2011 7:51 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] AAR question Hello All, I have a question i was doing the workbook 2 lab 7 and i had a questions that involved AAR and i got stuck br1, br2, hq were all ucm sites when the bandwidth between br2 and the other 2 sites (Br1, hq) wasn't enough to make the call AAR should kick in the br2 phones had a mailbox with CUE (cue was registered to ucm) I enabled AAR i setup AAR, the AAR group applied everywhere the AAR css, applied everywhere as well i had the External Phone Number mask set i created my route pattern being very specific and did all the digit manipulation so the call will succeed when i went to locations and reduced the BW to 20 and resynched the BW when i was calling br2 phone from br1 or hq. i was getting the AA for CUE and the called number on the pri was the external phone number mask assigned to the CTI Route Point and on the display on br1/hq phone was saying "not enough bw, rerouting" however when i went ahead and removed the call forward settings on BR2 phone and when I was trying to call br2 phone by dialing the internal extension ... i was getting busy no messages on the phones could you please help me understand why ? thank you ********************************************************************************************************************************************************************************************************************* * This Communication is Private & Confidential. This message and any attachments may contain information that is privileged and / or confidential and is the property of MHD InfoTech LLC. * * It is intended solely for the person to whom it is addressed. If you are not the intended recipient, you are hereby notified that you are not authorized to read, print, retain copy, disseminate, distribute, or * * use this message & any attachments or any part thereof. If you have received this message in error, please notify the sender immediately and delete the message and any attachments from your system. * *********************************************************************************************************************************************************************************************************************
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
