Hi Shrini,
Sorry for not answering you before. I had to stop my studies for a
while due to work :-(
Now I have tested it and here are my conclusions
Ephone-dn 11 octo-line
Number 4023
Huntstop channel 5
ephone 1
busy-trigger-per-button 4
button 1:1 2:11
!
ephone 2
busy-trigger-per-button 2
button 1:2 2:11
1st call answered by phone2
2nd call answered by phone2
3rd call answered by phone 1
4^th call answered by phone 1
5^th call busy!
The first two calls answered by phone 2 occupy a 2 channels of shared
dn 11 in phone 1 . So the busy trigger of phone 1 (busy trigger 4)
will allow only 2 more incoming calls.
Looking at the sh ephone before making the 5h call, 4 channels are
occupied for phone 1. So the next call will always give busy.
Have you tested? Does it work for you? Or am I missing anything and
there is a way to achieve this?
Thanks!!!!
ephone-1[0] Mac:0024.97AA.1B72 TCP socket:[3] activeLine:2 REGISTERED
in SCCP ver 17/9
mediaActive:1 offhook:1 ringing:0 reset:0 reset_sent:0 paging 0
debug:0 caps:9 privacy:1
IP:192.168.22.50 38312 7945 keepalive 16 max_line 2
button 1: dn 1 number 4001 CH1 IDLE CH2 IDLE
CH3 IDLE CH4 IDLE CH5 IDLE CH6
IDLE CH7 IDLE CH8 IDLE
button 2: dn 11 number 4023 CH1 HOLD CH2 CONNECTED
CH3 HOLD CH4 CONNECTED CH5 IDLE CH6
IDLE CH7 IDLE CH8 IDLE shared
paging-dn 9
Preferred Codec: g711ulaw
Active Call on DN 11 chan 4 :4023 192.168.22.50 20938 to
142.102.66.254 2000 via 10.10.112.1
G729 20 bytes no vad
Tx Pkts 444 bytes 14208 Rx Pkts 228 bytes 7296 Lost 218
Jitter 78 Latency 0 callingDn -1 calledDn -1
4 calls are visible on line 2
Username: br2ph1
ephone-2[1] Mac:0024.97AA.1B49 TCP socket:[2] activeLine:2 REGISTERED
in SCCP ver 17/9
mediaActive:1 offhook:1 ringing:0 reset:0 reset_sent:0 paging 0
debug:0 caps:9 privacy:1
IP:192.168.22.51 45034 7945 keepalive 15 max_line 2
button 1: dn 2 number 4002 CH1 IDLE CH2 IDLE
CH3 IDLE CH4 IDLE CH5 IDLE CH6
IDLE CH7 IDLE CH8 IDLE
button 2: dn 11 number 4023 CH1 HOLD CH2 CONNECTED
CH3 HOLD CH4 CONNECTED CH5 IDLE CH6
IDLE CH7 IDLE CH8 IDLE shared
paging-dn 9
Preferred Codec: g711ulaw
Active Call on DN 11 chan 2 :4023 192.168.22.51 29502 to
142.102.66.254 2000 via 10.10.112.1
G729 20 bytes no vad
Tx Pkts 1178 bytes 37696 Rx Pkts 295 bytes 9440 Lost 812
Jitter 158 Latency 0 callingDn -1 calledDn -1
4 calls are visible on line 2
Username: br2ph2
*De:*Shrini [mailto:linuxbos...@gmail.com]
*Enviado el:* sábado, 23 de abril de 2011 2:09
*Para:* Roig Borrell, Francesc Xavier; 'Peter Farkas';
ccie_voice@onlinestudylist.com
*Asunto:* RE: [OSL | CCIE_Voice] CME busy-trigger-button Problems
Roig,
This will do , lets assume you made 5 calls to the dn.
ephone-dn 10 octo
number 1000
huntstop channel 5 --------> This will limit 5 calls
ephone 1
busy-trigger-per-button 4 -- --------> 3rd 4th and 5th call you can
accept here
button 1:10
ephone 2
busy-trigger-per-button 2 -----------> 1st and 2nd call ringed here
and picked here (3rd call will not ring here)
button 1:10
You can test vice versa.
Thanks
Shrini
------------------------------------------------------------------------
*From:*ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Roig
Borrell, Francesc Xavier
*Sent:* Friday, April 22, 2011 5:45 AM
*To:* Peter Farkas; ccie_voice@onlinestudylist.com
*Subject:* Re: [OSL | CCIE_Voice] CME busy-trigger-button Problems
Hi Peter,
You are right. Testing it, the busy trigger applies in the shared line
So how could we achieve this?
shared line
-1) Maximum 5 incoming calls into the DN
-2) 1st phone should not receive not more than 4 incoming call and
2nd phone
Should not receive more than two
I have seen several posts proposing this config. But testing in the
lab it doesn't work for me
Due to previous reason (busy-trigger-per-button 4) the fifth call
always hears busy tone
http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg19976.html
ephone-dn 10 octo
number 1000
huntstop channel 5
ephone 1
busy-trigger-per-button 4
button 1:10
ephone 2
busy-trigger-per-button 2
button 1:10
With this config I can accomplish requirement 2 but how can I limit
the incoming calls to 5
ephone-dn 10 octo
number 1000
huntstop channel 5
no huntstop
ephone-dn 11 octo
number 1000
huntstop channel 5
preference 1
ephone 1
busy-trigger-per-button 4
button 1:10
ephone 2
busy-trigger-per-button 2
button 1:11
So guys could you help me with this? I'm blocked with this and it
seems it should be very easy...
Thank you very much!
Francesc
*De:*Andromeda Andromeda [mailto:diki...@gmail.com] *En nombre de
*Peter Farkas
*Enviado el:* jueves, 21 de abril de 2011 22:19
*Para:* Roig Borrell, Francesc Xavier; ccie_voice@onlinestudylist.com
*Asunto:* Re: [OSL | CCIE_Voice] CME busy-trigger-button Problems
In CME busy-trigger is the same common value for the shared line. Let
it be only one then if either instance serve a call it does not hunt
for an idle. This differs in UCM where all line is independent in
case of busy-trigger.
Peter
----- Original Message -----
*From:*Roig Borrell, Francesc Xavier
<mailto:francesc.ro...@tecnocom.es>
*To:*ccie_voice@onlinestudylist.com
<mailto:ccie_voice@onlinestudylist.com>
*Sent:*Thursday, April 21, 2011 9:36 PM
*Subject:*[OSL | CCIE_Voice] CME busy-trigger-button Problems
Hi all!!
I am having a behavior that It does not make any sense with this
easy scenario
ephone-dn 11 octo-line
number 4500
ephone 1
mac-address 0024.97AA.1B49
busy-trigger-per-button 1
type 7945
button 1:11
ephone 1
mac-address 0024.14B3.765E
busy-trigger-per-button 1
type 7965
button 1:11
First call to 4500, phone 1 and 2 rings, answer one of them o
Second call to 4500 gives busy !!????
Why? It is a shared octo-line and with this config I should
expect a second incoming call rings the idle phone, shouldn't it?!
If I change to
ephone 1
mac-address 0024.97AA.1B49
busy-trigger-per-button 2
type 7945
button 1:11
ephone 1
mac-address 0024.14B3.765E
busy-trigger-per-button 1
type 7965
button 1:11
I can have only 2 incoming calls to 4500. It seems like the
bigger busy-trigger-per-button value configured always triggers
the busy
What am I missing? I have spent several hours troubleshooting
this and I can't understand
Thanks in advance!!
Francesc
------------------------------------------------------------------------
_______________________________________________
For more information regarding industry leading CCIE Lab
training, please visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
