In which Device Pool and Region are your cue cti port and cti route point? On 17 May 2011 00:49, Stephen Manuel <srman...@bellsouth.net> wrote:
> In my home lab, I have the following > > > > 2811 router w/NM-CUE module w/7.0.1 software and CCM license. > > VM Ware Call Manager 7.0.1 software > > > > Router has VWIC-2MFT-T1 cards that are connected to my BR1 and BR2 routers > both w/VWIC-1MFT-T1 cards, all are showing multi frame established. > > HQ router is MGCP controlled and contains the CUE Module. > > I have CFB and Xcoder resources registered in UCM for the HQ router > > I’ve rechecked the region, mrgl, location settings in UCM and they appear > to be correct. > > > > Originally I had the CUE module working when the router was a CME router, > however I tried to wipe out the router config and start over. > > > > I have all the phone and gateway registered with UCM. > > > > I then reinstalled the CUE license and software to make it work with Call > Manager vs. CME. > > > > I have the CUE ports registered in Call Manager > > The CUE is showing it’s registered with Call Manager. > > > > The issue is when I press the messages button on a phone that has a VM > box, I get an immediate fast busy. > > > > When I call from another phone and the call rolls to VM same result, > immediate fast busy. > > > > I’m sore of stumped, I’ve suspected that the issue is Codec related, but > I’m unsure how to go about determining that. > > > > Any basic guidance would be greatly appreciated. > > > > Stephen Manuel > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com