Hi Michael, What is the destination phone? I guess it's CUCME? but is it SCCP Phone or SIP?
You've showed the dial-peers on CUBE, but what about dialpeers on the destination CUCME? What dial-peer is it matching? and what codec does that dial-peer have? Do the following on the CUCME: debug voice dialpeer inout check which dial-peer is incoming, and then check the codec on that dial-peer. Then if the endpoint is SCCP it should work, but if it's SIP then its different. You would have to check the codec under voice register pool. Regards, On Mon, May 23, 2011 at 7:03 PM, Michael Luo <hout...@gmail.com> wrote: > I was testing CUBE feature (H.323 to H.323). The call can ring the > destination. But when called party pick up, the call got disconnected with > fast busy. > > debug cch323 h225 shows "//31/8087591D0900/H323/cch323_h225_send_release: > Cause = 65". > > Per the symptom and debug, it seems to be a codec issue. But I've checked > the following: > > 1) "allow h323 to h323" > 2) incoming dial-peer was g.729r8 > 3) outgoing dial-peer was g.729r8 > 4) "Wait for Far End H.245 Terminal Capability Set" was unchecked > > What else shall I check? > > Thanks! > Michael > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
