as adam wrote, do on voice port unless otherwise stated. in real world, dial-peer translation-profile are used when PSTN connection is through BRI and FXO ports.
-adil On Wed, Jun 8, 2011 at 7:52 PM, Chris Green <voice5...@yahoo.com> wrote: > Hi All, > > What is the difference manipulating the digit on VOICE-PORT or POT as > follows? > > Which one expected for the exam and why? > > ----------------------------------------- > voice translation-rule 1 > rule 1 /^.*\(5...\)/ /\1/ > > voice translation-profile pstn-in > translate called 1 > > voice-port 0/1/0:23 > translation-profile incoming pstn-in > > dial-peer voice 1 pots > incoming called-number . > direct-inward-dial > > ------------------------------------------- > > voice translation-rule 1 > rule 1 /^.*\(5...\)/ /\1/ > > voice translation-profile pstn-in > translate called 1 > > dial-peer voice 1 pots > translation-profile incoming pstn-in > incoming called-number . > direct-inward-dial > port 0/1/0:23 > > ------------------------------------------- > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > -- . . . . _7___|___|_|_| adil.sha...@gmail.com . .
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com