Things to verify for basic phone reg: 1. Verify DHCP/Static settings, IP, TFTP, Default GW (could try pinging from CUCM server via CLI to phone IP). 2. Change CUCM servers to IP and not DNS name. 3. Enable auto reg on CM Server if desired. 4. Setup CUCM Group with auto reg if desired. 5. TFTP/CM Services started? (remember on both Pub and Sub depending how you setup tftp/cm group) 6. Auto reg phones should be shown or you can manually reg phones now.
HTH, Chris On Thu, Jun 16, 2011 at 9:39 AM, Vinay Kumar6 <vinayjaisw...@in.ibm.com>wrote: > Hi, > > Facing difficulty in registering the HQ Phones to CUCM, Routing is enabled > on the HQ router and Vlans are created on the switch. Phones are able to get > the IP address from the CUCM (DHCP) server., Not sure what exactly to check > for. > > Warm Regards, > Vinay Kumar > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
