It all depends on the requirements of the questions you are asked. Urgent priority: If not asked, I would not configure it.For AAR to work, you will need to consider the dial plan that you created in CUCM, since you may have conflicting patterns that would negatively impact AAR, and address it accordingly.
Keep in mind three things: The lab is not "best practice"; most of the things I did in my first attempt and in all of my studies for my next attempt have been things I would never do at the same time on the same systemIf in doubt, come up with a plan to answer the question and ask the proctor a question (hopefully one that shows you have a plan and attempts to clarify the requirement enough to modify said plan)The lab is not "best practice" Date: Sun, 26 Jun 2011 09:08:15 -0600 From: f.faraday...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Urgent priority check hi all, for Route Pattern in lab. when we need to check "urgent priority". I only use for 911 and 9911. do we need to use for AAR RP : \+.1 or other Route Pattern ? what is the best practice tks _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com