Hi Duy, Thanks I shall test it out and confirm. my understanding could be wrong.
Regards, Alex On Mon, Jun 27, 2011 at 10:04 PM, ccieid1ot <ccieid...@gmail.com> wrote: > Alex, definitely needed. Test it out by enabling it on HQ router than > don't enable on BR2 router. Now open up the cue gui and see if it operated > correctly. > > duy > ccie #27737 voice > > tmobile g2 > On Jun 27, 2011 6:17 AM, "Alex Goh" <ncsalex....@gmail.com> wrote: > > Hi Shrini, > > > > I guess what cristobal trying to mean is when he is using class based > > shaping, instead of FRTS which required the command on physical > interface, > > do he need to care about the qos setting between HQ and BR1. > > > > By the way, I have one question though, for the case when FRTS was enable > on > > HQ Physical serial interface, do we need to enable FRTS also on the > opposite > > site? I remember I tried before and WAN link isn't broken... > > > > Alex > > > > On Mon, Jun 27, 2011 at 3:44 PM, Shrini <linuxbos...@gmail.com> wrote: > > > >> ** > >> It looks like not effected but it is. > >> The bandwidth drops to 56k. > >> Good idea is to apply the Br2 service policy to Br1 connected srl > interface > >> even you not shaping the traffic. > >> > >> sh frame-relay pvc <dlci> will provide you the details. > >> > >> Thanks > >> Shrini > >> > >> On 6/26/2011 2:34 PM, Cristobal Priego wrote: > >> > >> hello all > >> > >> when you configure FRF.12 manually on your seial interfaces on HQ and > BR2 > >> on the HQ router where the same physical interface is used to connect > BR1 > >> and BR2, BR1 link isn't affected at all because traffic shaping isn't > >> enabled on the physical interface, correct ? > >> so i can pretty much ignore that link in regards to a basic QoS config > if > >> not needed > >> > >> thanks > >> > >> > >> _______________________________________________ > >> For more information regarding industry leading CCIE Lab training, > please visit www.ipexpert.com > >> > >> > >> Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > >> > >> > >> _______________________________________________ > >> For more information regarding industry leading CCIE Lab training, > please > >> visit www.ipexpert.com > >> > >> Are you a CCNP or CCIE and looking for a job? Check out > >> www.PlatinumPlacement.com > >> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
