CUCM does not support fractional PRIs in MGCP officially. ----- Reply message ----- From: "steven moran" <smoran...@gmail.com> Date: Sun, Jul 17, 2011 8:45 pm Subject: [OSL | CCIE_Voice] MGCP Gateway reg issue (not l2 TEI or l3 bind) To: <ccie_voice@onlinestudylist.com>
Dear all, thanks for all of the suggestions. I have removed the gateway from CM and restarted the Pub abd Sub servers from the CLI (utils system restart) I removed the mgcp bind media and control from the loopback interface and reloaded the BR1_RTR (after saving). This results in the gateway binding to the 1st BR1 serial int 10.10.111.2. I am curious as to why the logs show that the mgcp tries to bin to the full PRI even though the pri-group specifies that it should only bind to channels 1-6 fro mgcp. Does the 2651xm router support fractional pri bind for mgcp? Here is the config BR1-RTR(config)#do sh run Building configuration... Current configuration : 2653 bytes ! ! Last configuration change at 07:53:31 AEST Mon Jul 18 2011 ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname BR1-RTR ! boot-start-marker boot system flash:c2600-adventerprisek9_ivs-mz.124-15.T14.bin boot-end-marker ! enable secret 5 $1$LaQO$FR59LroSkjvjxYkzDsZ1N/ ! no aaa new-model clock timezone AEST 9 clock summer-time AEST recurring 1 Sun Apr 1:00 last Sun Oct 1:00 network-clock-participate wic 1 network-clock-select 1 E1 0/1 voice-card 0 dspfarm no local-bypass ! ip cef ! ! ! ! ip domain name lab.com ! multilink bundle-name authenticated ! isdn switch-type primary-net5 ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! archive log config hidekeys ! ! ! ! controller E1 0/1 pri-group timeslots 1-6,16 service mgcp ! controller E1 0/2 shutdown ! ! ! ! ! interface Loopback0 description management ip address ip address 10.10.110.2 255.255.255.255 ip ospf network point-to-point ! interface FastEthernet0/0 no ip address duplex auto speed auto ! interface FastEthernet0/0.130 description data vlan to switch encapsulation dot1Q 130 native ip address 10.10.101.1 255.255.255.0 ip helper-address 10.10.210.10 ! interface FastEthernet0/0.240 description br1 voice vlan encapsulation dot1Q 240 ip address 10.10.201.1 255.255.255.0 ip helper-address 10.10.210.10 ! interface Serial0/0 no ip address encapsulation frame-relay frame-relay lmi-type ansi ! interface Serial0/0.1 point-to-point ip address 10.10.111.2 255.255.255.0 snmp trap link-status frame-relay interface-dlci 101 ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/1:15 no ip address encapsulation hdlc isdn switch-type primary-net5 isdn incoming-voice voice isdn bind-l3 ccm-manager no cdp enable ! router eigrp 1 network 10.0.0.0 no auto-summary ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ! ! ! ! ! ! control-plane ! ! ! voice-port 0/1:15 ! ccm-manager switchback immediate ccm-manager redundant-host 10.10.210.10 ccm-manager mgcp ! mgcp mgcp call-agent 10.10.210.11 service-type mgcp version 0.1 mgcp dtmf-relay voip codec all mode out-of-band ! mgcp profile default ! ! ! ! ! ! gatekeeper shutdown ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 exec-timeout 0 0 privilege level 15 logging synchronous no login transport preferred none transport input telnet line vty 5 15 exec-timeout 0 0 privilege level 15 logging synchronous no login transport preferred none transport input telnet ! ntp clock-period 17207971 ntp server 10.10.100.2 ! end Here is the sh isdn stat BR1-RTR(config)#do sh isdn stat Global ISDN Switchtype = primary-net5 %Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 0. Layer 3 output may not apply ISDN Serial0/1:15 interface dsl 0, interface ISDN Switchtype = primary-net5 L2 Protocol = Q.921 0x0000 L3 Protocol(s) = CCM MANAGER 0x0003 Layer 1 Status: ACTIVE Layer 2 Status: TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED Layer 3 Status: 0 Active Layer 3 Call(s) Active dsl 0 CCBs = 0 The Free Channel Mask: 0x8000003F Number of L2 Discards = 0, L2 Session ID = 1 Total Allocated ISDN CCBs = 0 BR1-RTR(config)# Here is the sh ccm MGCP Domain Name: BR1-RTR.lab.com Priority Status Host ============================================================ Primary Registered 10.10.210.11 First Backup Backup Ready 10.10.210.10 Second Backup None Current active Call Manager: 10.10.210.11 Backhaul/Redundant link port: 2428 Failover Interval: 30 seconds Keepalive Interval: 15 seconds Last keepalive sent: 10:24:58 AEST Jul 18 2011 (elapsed time: 00:00:08) Last MGCP traffic time: 10:24:58 AEST Jul 18 2011 (elapsed time: 00:00:08) Last failover time: 10:11:26 AEST Jul 18 2011 from (10.10.210.11) Last switchback time: 10:12:56 AEST Jul 18 2011 from (10.10.210.10) Switchback mode: Immediate MGCP Fallback mode: Not Selected
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com