check also did the mva was enable for the user under end user page.

On Sat, Aug 27, 2011 at 1:00 AM, Mini Me <cciev.min...@gmail.com> wrote:

> Did you enable it in Service Parameters?
>
> HTH
>
> From: Ray <jonha...@yahoo.com>
> Reply-To: Ray <jonha...@yahoo.com>
> Date: Fri, 26 Aug 2011 08:32:19 -0700 (PDT)
> To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>
> Subject: [OSL | CCIE_Voice] (no subject)
>
> when i dial 3033300 from 5252222 pstn 2nd and put the pin 12345, MVA IVR
> ask me to press 2 to turn on the remote dest or press 3 to turn it off.. it
> doesnt let me dial any extension.. help
>
> SB#sho run
> Building configuration...
>
>
> Current configuration : 5001 bytes
> !
> ! Last configuration change at 05:10:01 CST Fri Aug 26 2011
> ! NVRAM config last updated at 23:36:37 CST Mon Aug 22 2011
> !
> version 15.0
> service timestamps debug datetime msec
> service timestamps log datetime msec
> no service password-encryption
> !
> hostname BR1
> !
> boot-start-marker
> boot-end-marker
> !
> !
> no aaa new-model
> !
> !
> !
> clock timezone CST -6
> clock summer-time CST recurring
> network-clock-participate wic 2
> !
> dot11 syslog
> ip source-route
> !
> !
> ip cef
> !
> ip dhcp pool phone
>    network 177.2.11.0 255.255.255.0
>    default-router 177.2.11.1
>    option 150 ip 10.11.11.19
> !
> !
> no ipv6 cef
> !
> multilink bundle-name authenticated
> !
> !
> !
> !
> isdn switch-type primary-ni
> !
> !
> !
> voice class codec 1
>  codec preference 1 g711ulaw
>  codec preference 2 g729r8
> !
> voice class h323 1
>   h225 timeout tcp establish 3
>   call start slow
> !
> !
> !
> voice translation-rule 1
>  rule 1 // // type any unknown plan any isdn
> !
> voice translation-rule 2
>  rule 1 // // type any subscriber plan any isdn
> !
> voice translation-rule 3
>  rule 1 // // type any national plan any isdn
> !
> voice translation-rule 4
>  rule 1 // // type any international plan any isdn
> !
> voice translation-rule 5
>  rule 1 /.*\(3...\)/ /\1/
> !
> voice translation-rule 11
>  rule 1 /^3...$/ /972303&/ type any unknown plan any isdn
> !
> voice translation-rule 12
>  rule 1 /^3...$/ /303&/ type any subscriber plan any isdn
> !
> voice translation-rule 13
>  rule 1 /^3...$/ /972303&/ type any national plan any isdn
> !
> voice translation-rule 14
>  rule 1 /^3...$/ /+1972303&/ type any international plan any isdn
>  rule 2 /^4...$/ /+8522404&/ type any international plan any isdn
> !
> !
> voice translation-profile 911
>  translate calling 11
>  translate called 1
> !
> voice translation-profile INC
>  translate called 5
> !
> voice translation-profile intl
>  translate calling 14
>  translate called 4
> !
> voice translation-profile local
>  translate calling 12
>  translate called 2
> !
> voice translation-profile nat
>  translate calling 13
>  translate called 3
> !
> !
> voice-card 0
> !
> !
> application
>  service mva http://10.11.11.19:8080/ccmivr/pages/IVRMainpage.vxml
>  !
> !
> !
> !
> !
> !
> license udi pid CISCO2811 sn FTX0902D1ZG
> !
> redundancy
> !
> !
> controller T1 0/2/0
>  pri-group timeslots 1-4,24
> !
> !
> !
> !
> !
> !
> !
> !
> !
> interface Loopback0
>  ip address 18.1.1.1 255.255.255.0
>  ip ospf network point-to-point
>  h323-gateway voip interface
>  h323-gateway voip bind srcaddr 18.1.1.1
>  !
> !
> interface FastEthernet0/0
>  no ip address
>  shutdown
>  duplex auto
>  speed auto
>  !
> !
> interface FastEthernet0/1
>  no ip address
>  shutdown
>  duplex auto
>  speed auto
>  !
> !
> interface FastEthernet0/1/0
>  switchport trunk native vlan 12
>  switchport mode trunk
>  switchport voice vlan 11
>  spanning-tree portfast
>  !
> !
> interface FastEthernet0/1/1
>  switchport trunk native vlan 12
>  switchport mode trunk
>  switchport voice vlan 11
>  spanning-tree portfast
>  !
> !
> interface FastEthernet0/1/2
>  switchport trunk native vlan 12
>  switchport mode trunk
>  switchport voice vlan 11
>  spanning-tree portfast
>  !
> !
> interface FastEthernet0/1/3
>  switchport trunk native vlan 12
>  switchport mode trunk
>  switchport voice vlan 11
>  spanning-tree portfast
>  !
> !
> interface Serial0/0/0
>  no ip address
>  encapsulation frame-relay
>  no frame-relay inverse-arp
>  !
> !
> interface Serial0/0/0.101 point-to-point
>  ip address 177.0.101.2 255.255.255.0
>  frame-relay interface-dlci 602
> !
> interface Serial0/0/1
>  no ip address
>  shutdown
>  clock rate 2000000
>  !
> !
> interface Serial0/2/0:23
>  no ip address
>  encapsulation hdlc
>  isdn switch-type primary-ni
>  isdn incoming-voice voice
>  isdn outgoing ie facility
>  isdn outgoing display-ie
>  no cdp enable
>  !
> !
> interface Vlan1
>  no ip address
>  !
> !
> interface Vlan11
>  ip address 177.2.11.1 255.255.255.0
>  ip helper-address 10.11.11.19
>  !
> !
> interface Vlan12
>  ip address 177.2.12.1 255.255.255.0
>  !
> !
> !
> router ospf 1
>  log-adjacency-changes
>  network 18.1.1.1 0.0.0.0 area 0
>  network 177.0.101.0 0.0.0.255 area 0
>  network 177.2.11.0 0.0.0.255 area 0
>  network 177.2.12.0 0.0.0.255 area 0
> !
> ip forward-protocol nd
> no ip http server
> no ip http secure-server
> !
> !
> !
> !
> !
> !
> !
> !
> !
> control-plane
>  !
> !
> !
> voice-port 0/2/0:23
>  translation-profile incoming INC
> !
> !
> mgcp fax t38 ecm
> !
> !
> dial-peer voice 1 pots
>  incoming called-number .
>  direct-inward-dial
> !
> dial-peer voice 19 voip
>  destination-pattern 3...$
>  session target ipv4:10.11.11.19
>  voice-class codec 1
>  dtmf-relay h245-alphanumeric
> !
> dial-peer voice 912 pots
>  translation-profile outgoing local
>  destination-pattern 9[2-9]......$
>  port 0/2/0:23
> !
> dial-peer voice 911 pots
>  translation-profile outgoing 911
>  destination-pattern 911
>  no digit-strip
>  port 0/2/0:23
> !
> dial-peer voice 913 pots
>  translation-profile outgoing nat
>  destination-pattern 91[2-9]..[2-9]......$
>  port 0/2/0:23
>  prefix 1
> !
> dial-peer voice 914 pots
>  translation-profile outgoing intl
>  destination-pattern 9011T
>  port 0/2/0:23
>  prefix 011
> !
> dial-peer voice 3300 pots
>  service mva
>  incoming called-number 3300
>  no digit-strip
>  direct-inward-dial
> !
> !
> !
> !
> line con 0
> line aux 0
> line vty 0 4
>  login
> !
> scheduler allocate 20000 1000
> ntp server 10.11.11.1
> ntp server 17.1.1.1
> end
>
>
>
>
>
> ug 26 10:32:36.865: ISDN Se0/2/0:23 Q931: TX -> CONNECT pd = 8  callref =
> 0x80C4
> Aug 26 10:32:36.877: ISDN Se0/2/0:23 Q931: RX <- CONNECT_ACK pd = 8
>  callref = 0x00C4
> Aug 26 10:32:36.877: %ISDN-6-CONNECT: Interface Serial0/2/0:0 is now
> connected to 5252222 N/A
> Aug 26 10:34:17.545: %ISDN-6-DISCONNECT: Interface Serial0/2/0:0
>  disconnected from 5252222 , call lasted 100 seconds
> Aug 26 10:34:17.549: ISDN Se0/2/0:23 Q931: TX -> DISCONNECT pd = 8  callref
> = 0x80C4
>         Cause i = 0x8090 - Normal call clearing
> Aug 26 10:34:17.561: ISDN Se0/2/0:23 Q931: RX <- RELEASE pd = 8  callref =
> 0x00C4
> Aug 26 10:34:17.561: ISDN Se0/2/0:23 Q931: TX -> RELEASE_COMP pd = 8
>  callref = 0x80C4
> Aug 26 18:17:28.921: ISDN Se0/2/0:23 Q931: RX <- SETUP pd = 8  callref =
> 0x00C5
>         Sending Complete
>         Bearer Capability i = 0x8090A2
>                 Standard = CCITT
>                 Transfer Capability = Speech
>                 Transfer Mode = Circuit
>                 Transfer Rate = 64 kbit/s
>         Channel ID i = 0xA98381
>                 Exclusive, Channel 1
>         Progress Ind i = 0x8583 - Origination address is non-ISDN
>         Display i = 'PSTN_siteB-phone'
>         Calling Party Number i = 0x4180, '5252222'
>                 Plan:ISDN, Type:Subscriber(local)
>         Called Party Number i = 0xC1, '3033300'
>                 Plan:ISDN, Type:Subscriber(local)
> Aug 26 18:17:28.925: ISDN Se0/2/0:23 Q931: Received SETUP  callref = 0x80C5
> callID = 0x002F switch = primary-ni interface = User
> Aug 26 18:17:28.993: ISDN Se0/2/0:23 Q931: TX -> CALL_PROC pd = 8  callref
> = 0x80C5
>         Channel ID i = 0xA98381
>                 Exclusive, Channel 1
> Aug 26 18:17:28.993: ISDN Se0/2/0:23 Q931: TX -> CONNECT pd = 8  callref =
> 0x80C5
> Aug 26 18:17:29.005: ISDN Se0/2/0:23 Q931: RX <- CONNECT_ACK pd = 8
>  callref = 0x00C5
> Aug 26 18:17:29.009: %ISDN-6-CONNECT: Interface Serial0/2/0:0 is now
> connected to 5252222 N/A
> Aug 26 18:18:27.795: ISDN Se0/2/0:23 Q931: RX <- DISCONNECT pd = 8  callref
> = 0x00C5
>         Cause i = 0x8290 - Normal call clearing
> Aug 26 18:18:27.795: %ISDN-6-DISCONNECT: Interface Serial0/2/0:0
>  disconnected from 5252222 , call lasted 58 seconds
> Aug 26 18:18:27.795: ISDN Se0/2/0:23 Q931: TX -> RELEASE pd = 8  callref =
> 0x80C5
> Aug 26 18:18:27.807: ISDN Se0/2/0:23 Q931: RX <- RELEASE_COMP pd = 8
>  callref = 0x00C5
> SB>
> _______________________________________________ For more information
> regarding industry leading CCIE Lab training, please visit
> www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Reply via email to