i have recreate it in my lab to be accurate , in my config i made the incoming dialpeer with G711 and i am sending G729 call :
loneCluster><NID::10.10.210.11><CT::2,100,16,10.2><IP::10.10.100.2><DEV::Port 15861><LVL::Detailed><MASK::0100> 09/29/2011 22:32:58.497 CCM|value H323-UserInformation ::= |<CLID::StandAloneCluster><NID::10.10.210.11><LVL::State Transition><MASK::0100> 09/29/2011 22:32:58.498 CCM|{ h323-uu-pdu { h323-message-body releaseComplete : { protocolIdentifier { 0 0 8 2250 0 5 }, callIdentifier { guid '80D4BC7E562A51E8060013020A0AC91D'H } }, h245Tunneling FALSE }|<CLID::StandAloneCluster><NID::10.10.210.11><LVL::State Transition><MASK::0100> 09/29/2011 22:32:58.498 CCM|}|<CLID::StandAloneCluster><NID::10.10.210.11><LVL::State Transition><MASK::0100> 09/29/2011 22:32:58.498 CCM| |<CLID::StandAloneCluster><NID::10.10.210.11><LVL::State Transition><MASK::0040> 09/29/2011 22:32:58.498 CCM|Out Message -- H225ReleaseCompleteMsg -- Protocol= H225Protocol|<CLID::StandAloneCluster><NID::10.10.210.11><LVL::Significant><MASK::0040> 09/29/2011 22:32:58.498 CCM|Ie - Q931CauseIe IEData= 08 02 80 AF |<CLID::StandAloneCluster><NID::10.10.210.11><LVL::State Transition><MASK::0040> Q931CauseIe IEData= 08 02 80 AF check the doc i have pointed and you will find that AF is resources unavailable ... i hope this is clear Ash On Thu, Sep 29, 2011 at 2:58 PM, Ashraf Ayyash <ash.ayy...@gmail.com> wrote: > i dont fully understand what you are looking for , > > on the ccm traces you will find Cause = <the disconnect cause > and > its Q931 in there few line above the release complete message , > and to know what is the cause you need to use the DOC i have sent to > you , which will explain and show you what does it mean , > > if you have more specific Q please let me /us know > > Ash > > On Thu, Sep 29, 2011 at 12:39 PM, Ray <jonha...@yahoo.com> wrote: >> what option or command do i have to take out/uncheck inorder to see the >> q931 cause code id 8081 in the CUCM traces.. because i set it up and >> confirmed all the commands in the workbook and everything is working fine..i >> can't generate the cause code 8081..Anyone knows how to create the q931 >> cause code id 8081? >> >> >> ________________________________ >> From: Ray <jonha...@yahoo.com> >> To: ccie voice <ccie_voice@onlinestudylist.com> >> Sent: Thursday, September 29, 2011 10:37 AM >> Subject: [OSL | CCIE_Voice] lab3 gatekeeper >> >> what option or command do i have to take out inorder to the the q931 cause >> code id 8081.. because i set it up and confired all the commands in the >> workbook and everything is working fine..i can't generate the cause code >> 8081.. >> HQ# >> gatkeeper >> zone local GK ccievoice.com 142.1.64.254 >> zone remote BBGK cisco.com 155.26.1.100 1719 >> zone prefix BBGK 01144* >> zone prefix BBGK 44* >> no shut >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com