The weights are relative to each other. Assuming priority queue is enabled on queue 1 and having Srr-queue bandwidth share 1 2 4 4 would mean:
Queue 2 = 2/10 or 20% Queue 3 = 4/10 or 40% Queue 4 = 4/10 or 40% Both ways get the same results. There is no reason for the shape 3 0 0 0 unless required to shape queue 1 and you are no doing priority queuing. HTH Chris On Sat, Oct 1, 2011 at 5:04 AM, Nowork_onlyfun <noworkonlyf...@gmail.com>wrote: > Hi Guys > > I am doing a lab and little confused with the proposed solution. > > The requirement is that on interface queue 2 queue 3 queue 4 should share > bandwidth as 20 40 40 percentage. > > Now what's the best answer. > > Interface f1/0/1 > Srr-queue bandwidth share 1 2 4 4 > > Or > > Interface f1/0/1 > Srr-queue bandwidth share 1 20 40 40 > > I think I am little confused with how to set the weights right. Need your > advice here .. > > Also if the question doesn't mention anything do we need to put shape 3 0 0 > 0 command regardless ? > > > > Thanks in advance > > Sent from my iPad > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com